ADNS-4000 Avago Technologies US Inc., ADNS-4000 Datasheet - Page 6

• Manufacturer Part Number: ADNS-4000
• Description: SENSOR OPTICAL MOUSE LP 8DIP
• Manufacturer: Avago Technologies US Inc.

Specifications of ADNS-4000

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Figure 6. Exploded View of Assembly
PCB Assembly Considerations
1. Insert the sensor and all other electrical components
2. Insert the LED into the assembly clip and bend the
3. Insert the LED clip assembly into PCB.
4. This sensor package is only qualifi ed for wave-solder
5. Wave solder the entire assembly in a no-wash solder
6. Place the lens onto the base plate.
7. Remove the protective kapton tape from optical
8. Insert PCB assembly over the lens onto the base plate
6
into PCB.
leads 90 degrees.
process.
process utilizing solder fi xture. The solder fi xture
is needed to protect the sensor during the solder
process. It also sets the correct sensor-to-PCB distance
as the lead shoulders do not normally rest on the PCB
surface. The fi xture should be designed to expose
the sensor leads to solder while shielding the optical
aperture from direct solder contact.
aperture of the sensor. Care must be taken to
keep contaminants from entering the aperture.
Recommend not to place the PCB facing up during the
entire mouse assembly process. Recommend to hold
the PCB fi rst vertically for the kapton removal process.
aligning post to retain PCB assembly. The sensor
aperture ring should self-align to the lens.
LED
LED Clip
ADNS-4000 (Sensor)
Customer supplied PCB
ADNS-5110-001
Customer supplied base plate with
recommended alignment features
per IGES drawing
9. The optical position reference for the PCB is set by the
10. Install mouse top case. There MUST be a feature in
Figure 7. Block diagram of ADNS-4000 optical mouse
VDD3
GND
LED
base plate and lens. Note that the PCB motion due to
button presses must be minimized to maintain optical
alignment.
the top case to press down onto the PCB assembly to
ensure all components are interlocked to the correct
vertical height.
ADNS-4000
IMAGE ARRAY
OSCILLATOR
DSP
NCS
SCLK
MOSI
MISO
MOTION