DS21352L+ Maxim Integrated Products, DS21352L+ Datasheet - Page 62

• Manufacturer Part Number: DS21352L+
• Description: IC TXRX T1 1-CHIP 3.3V 100-LQFP
• Manufacturer: Maxim Integrated Products

Specifications of DS21352L+

• Function: Single-Chip Transceiver
• Interface: HDLC, T1
• Number Of Circuits: 1
• Voltage - Supply: 3.14 V ~ 3.47 V
• Current - Supply: 75mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 100-LQFP
• Includes: DSX-1 and CSU Line Build-Out Generator, HDLC Controller, In-Band Loop Code Generator and Detector
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power (watts): -

11.2.1 FIXED PER-CHANNEL IDLE CODE INSERTION
The first method on the receive side involves using the Receive Mark Registers (RMR1/2/3) to determine
which of the 24 T1 channels should be overwritten with either a 7Fh idle code or with a digital milliwatt
pattern. The RCR2.7 bit will determine which code is used. The digital milliwatt code is an eight byte
repeating pattern that represents a 1 kHz sine wave (1E/0B/0B/1E/9E/8B/8B/9E). Each bit in the RMRs,
represents a particular channel. If a bit is set to a one, then the receive data in that channel will be
replaced with one of the two codes. If a bit is set to zero, no replacement occurs.
RMR1/RMR2/RMR3: RECEIVE MARK REGISTERS (Address=2D to 2F Hex
11.2.2 UNIQUE PER-CHANNEL CODE INSERTION
The second method involves using the Receive Channel Control Registers (RCC1/2/3) to determine
which of the 24 T1 channels off of the T1 line and going to the backplane should be overwritten with the
code placed in the Receive Channel Registers (RC1 to RC24). This method is more flexible than the first
in that it allows a different 8–bit code to be placed into each of the 24 T1 channels.
RC1 TO RC24: RECEIVE CHANNEL REGISTERS (Address=80 to 8F and 58 to
5F Hex)
(for brevity, only channel one is shown; see Table 5-1 for other register address)
(MSB)
(MSB)
SYMBOLS
CH16
CH24
SYMBOL
CH8
C7
CH1-24
C7
C0
CH15
CH23
CH7
C6
POSITION
POSITIONS
RMR1.0-3.7
RC1.7
RC1.0
CH14
CH22
CH6
C5
NAME AND DESCRIPTION
LSB of the Code (this bit is sent last to the backplane)
MSB of the Code (this bit is sent first to the backplane)
NAME AND DESCRIPTION
Receive Channel Mark Control Bits
0 =do not affect the receive data associated with this channel
1 = replace the receive data associated with this channel with idle code or digital
milliwatt code (depends on the RCR2.7 bit)
CH13
CH21
CH5
C4
CH12
CH20
CH4
C3
62 of 137
CH11
CH19
CH3
C2
CH10
CH18
CH2
C1
(LSB)
(LSB)
CH17
CH1
CH9
C0
RMR1(2D)
RMR2(2E)
RMR3(2F)
RC1 (80)
)