DS3171N+ Maxim Integrated Products, DS3171N+ Datasheet - Page 141

• Manufacturer Part Number: DS3171N+
• Description: TXRX SGL DS3/E3 400PBGA
• Manufacturer: Maxim Integrated Products

Specifications of DS3171N+

• Function: Single-Chip Transceiver
• Interface: DS3, E3
• Number Of Circuits: 1
• Voltage - Supply: 3.135 V ~ 3.465 V
• Current - Supply: 273mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 400-BGA
• Includes: DS3 Framers, E3 Framers, HDLC Controller, On-Chip BERTs
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power (watts): -
• Other names: 90-31710+N00

Register Name:
Register Description:
Register Address:
Bit #
Name
Bit #
Name
Bit 9: Port Status Register Interrupt Status (PSR) This bit is set when any of the latched status register bits, that
are enabled for interrupt, in the PORT.SRL register are set. The interrupt pin will be driven when this bit is set and
the corresponding GL.ISRIE.PISRIE[4:1] is set.
bits, that are enabled for interrupt, in the B3ZS/HDB3 Line Encoder/Decoder block are set. The interrupt pin will be
driven when this bit is set and the corresponding GL.ISRIE.PISRIE[4:1] is set.
Bit 7: Trail Trace Status Register Interrupt Status (TTSR) This bit is set when any of the latched status register
bits, that are enabled for interrupt, in the trail trace block are set. The interrupt pin will be driven when this bit is set
and the corresponding GL.ISRIE.PISRIE[4:1] is set.
Bit 6: FEAC Status Register Interrupt Status (FSR) This bit is set when any of the latched status register bits,
that are enabled for interrupt, in the FEAC block are set. The interrupt pin will be driven when this bit is set and the
corresponding GL.ISRIE.PISRIE[4:1] is set.
Bit 5: HDLC Status Register Interrupt Status (HSR) This bit is set when any of the latched status register bits,
that are enabled for interrupt, in the HDLC block are set. The interrupt pin will be driven when this bit is set and the
corresponding GL.ISRIE.PISRIE[4:1] is set.
Bit 4: BERT Status Register Interrupt Status (BSR) This bit is set when any of the latched status register bits,
that are enabled for interrupt, in the BERT block are set. The interrupt pin will be driven when this bit is set and the
corresponding GL.ISRIE.PISRIE[4:1] is set.
Bit 0: Framer Status Register Interrupt Status (FMSR) This bit is set when any of the latched status register bits,
that are enabled for interrupt, in the active DS3 or E3 framer block are set. The interrupt pin will be driven when this
bit is set and the corresponding GL.ISRIE.PISRIE[4:1] is set.
Bit 8: Line Code Status Register Interrupt Status (LCSR) This bit is set when any of the latched status register
TTSR
15
--
7
FSR
14
--
6
PORT.ISR
Port Interrupt Status Register
(0,2,4,6)50h
HSR
13
--
5
BSR
12
--
4
141
RESERVED
11
--
3
RESERVED
10
--
2
RESERVED
PSR
9
1
FMSR
LCSR
8
0