ATxmega64A3 Atmel Corporation, ATxmega64A3 Datasheet - Page 100

• Manufacturer Part Number: ATxmega64A3
• Manufacturer: Atmel Corporation

Specifications of ATxmega64A3

• Flash (kbytes): 64 Kbytes
• Pin Count: 64
• Max. Operating Frequency: 32 MHz
• Cpu: 8-bit AVR
• # Of Touch Channels: 16
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 50
• Ext Interrupts: 50
• Usb Speed: No
• Usb Interface: No
• Spi: 10
• Twi (i2c): 2
• Uart: 7
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 16
• Adc Resolution (bits): 12
• Adc Speed (ksps): 2000
• Analog Comparators: 4
• Resistive Touch Screen: No
• Dac Channels: 2
• Dac Resolution (bits): 12
• Temp. Sensor: Yes
• Crypto Engine: AES/DES
• Sram (kbytes): 4
• Eeprom (bytes): 2048
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: Yes
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.6 to 3.6
• Operating Voltage (vcc): 1.6 to 3.6
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 7
• Output Compare Channels: 22
• Input Capture Channels: 22
• Pwm Channels: 22
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

XMEGA A
• Bit 3 - SPI: Serial Peripheral Interface
Setting this bit stops the clock to the SPI. When the bit is cleared the peripheral should be reini-
tialized to ensure proper operation.
• Bit 2 - HIRES: Hi-Resolution Extension
Setting this bit stops the clock to the Hi-Resolution Extension for the Timer/Counters. When the
bit is cleared the peripheral should be reinitialized to ensure proper operation.
• Bit 1 - TC1: Timer/Counter 1
Setting this bit stops the clock to the Timer/Counter 1. When the bit is cleared the peripheral will
continue like before the shut down.
• Bit 0 - TC0: Timer/Counter 0
Setting this bit stops the clock to the Timer/Counter 0. When the bit is cleared the peripheral will
continue like before the shut down.
100
8077H–AVR–12/09