5-2007615-5 TE Connectivity, 5-2007615-5 Datasheet - Page 3

• Manufacturer Part Number: 5-2007615-5
• Manufacturer: TE Connectivity

Specifications of 5-2007615-5

• Solder Ball: Tin-Silver
• Product Height: 5mm
• Number Of Positions: 200
• Vacuum Cover: With
• Contact Type: Socket
• Contact Base Material: Copper Alloy
• Contact Finish: Gold (30) over Nickel (50)
• Connector Style: Receptacle
• Housing Material: Thermoplastic - GF
• Stack Height (mm [in]): 15.00 [0.591], 17.00 [0.669], 18.00 [0.709], 20.00 [0.787], 25.00 [0.984], 30.00 [1.181]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Hard Tray

Withstanding voltage.
Current rating.
Vibration, sinusoidal.
Mechanical shock.
Durability.
Mating/unmating force.
Rev B
Test Description
1 minute hold with no breakdown,
flashover, or excessive leakage
current >1 milliampere.
30
above ambient (25 ± 5
ampere.
No discontinuities of 1 microsecond
or longer duration.
See Note.
No discontinuities of 1 microsecond
or longer duration.
See Note.
See Note.
Maximum total mating force:
10 kg for 104 position;
19 kg for 200 position;
28 kg for 296 position.
Minimum total unmating force:
2.5 kg for 104 position;
4.8 kg for 200 position;
7.1 kg for 296 position.
/
C maximum temperature rise
Figure 1 (continued)
MECHANICAL
Requirement
/
C ) at 1
EIA-364-20, Condition I.
500 volts DC at sea level.
Test between 10 signal-signal pair
and 10 signal-to-adjacent ground
contacts of mated specimens.
Measure temperature rise on all
contacts in 3 adjacent wafers of
mated and mounted specimens.
Measure temperature rise on all
signal contacts in 3 adjacent wafers
of mated and mounted specimens.
Measure temperature rise on all
ground contacts in 3 adjacent
wafers of mated and mounted
specimens.
EIA-364-28, Test Condition II.
Subject mated specimens to 10-
500-10 Hz traversed in 15 minutes
with 1.5 mm maximum total
excursion. Eight hours in each of 3
mutually perpendicular planes.
EIA-364-27, Method H.
Subject mated specimens to 30 G's
half-sine shock pulses of 11
milliseconds duration. Three shocks
in each direction applied along 3
mutually perpendicular planes, 18
total shocks.
EIA-364-9.
Mate and unmate specimens for 25
cycles at a maximum rate of 500
cycles per hour. The first 13 cycles
shall be performed prior to specific
environmental test in the sequence.
The remaining 12 cycles shall be
performed after environmental test.
The test shall be performed with
plug and receptacle soldered to
board.
EIA-364-13.
Measure force necessary to mate
and unmate specimens at a rate of
12.7 to 25.4 mm per minute.
Procedure
108-2143
3 of 8