1376421-1 TE Connectivity, 1376421-1 Datasheet - Page 15

• Manufacturer Part Number: 1376421-1
• Manufacturer: TE Connectivity

Specifications of 1376421-1

• Product Line: 5.0 Power Key Connectors
• Product Type: Connector
• Connector Type: Header
• Pcb Mount Retention: With
• Pcb Mount Alignment: Without
• Termination Method To Pc Board: Through Hole - Press Fit
• Pcb Mounting Orientation: Vertical
• Shrouded: Yes
• Sealed: No
• Shape: Rectangular
• Ul File Number: E28476
• Csa File Number: LR7189
• Mating Post Length (mm [in]): 6.30 [0.248]
• Mating Retention Type: Latching
• Contact - Rated Current (a): 9
• Hot Pluggable: No
• Operating Voltage Reference: AC
• Operating Voltage (vac): 300
• Tail Length (mm [in]): 3.5 [0.138]
• Tail Orientation: In-line
• Profile Height (y-axis) (mm [in]): 7.00 [0.275]
• Number Of Positions: 3
• Number Of Rows: 1
• Mating Retention: With
• Header Type: Shrouded
• Selectively Loaded: No
• Pcb Mount Retention Type: Mounting Post/Kinked Legs
• Centerline (mm [in]): 5.00 [0.197]
• Length (x-axis) (mm [in]): 16.60 [0.653]
• Width (z-axis) (mm [in]): 14.10 [0.555]
• Contact Type: Pin
• Contact Base Material: Copper Alloy
• Contact Plating, Mating Area, Material: Tin
• Contact Design: Tab
• Contact Plating, Mating Area, Thickness (µm [?in]): 0.8 [31.5]
• Tail Plating Material: Tin
• Tail Plating, Thickness (µm [?in]): 1 [40]
• Connector Style: Receptacle
• Housing Color: Natural
• Mating Alignment: Without
• Housing Material: Nylon 6/6 GF
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Converted to comply with RoHS directive
• Agency/standard: UL, CSA
• Ul Rating: Recognized
• Ul Voltage Rating (vac): 300
• Operating Temperature (°c [°f]): -30 – +105 [-22 – +221]
• Applies To: Printed Circuit Board
• Pcb Thickness, Recommended (mm [in]): 1.60 [0.063]
• Application Use: Wire-to-Board
• Contact Transmits (typical Application): Signal (Data)/ Power
• Packaging Method: Loose Piece

4. 品質保証条件
4.1 試験条件
特に指定のない場合､下記に示す環境条件のもとで性能
試験を行うものとする｡
温 度
相対湿度
気 圧
4.2 試験
4.2.1
性能試験に用いる試料は､該当製品図面上の規定事項
に合致したものであること｡
また、圧着コンタクトは『5mm ピッチ W-T-B コネクタの
圧着条件 114-5292』に基づいて Fig.6 に示す電線を
圧着した正規の試料であること｡
4.2.2
性能試験して用いる電線は､Fig. 6 に示す電線にて
行うものとする｡
Rev.E
計算断面積(mm
Cross-sectional
Area(mm
Calculated
試料
使用電線
0.22
0.31
0.51
0.76
1.27
2
)
2
)
15～35℃
45～75 %
86.6～106.6 Kpa
AWG
24
22
20
18
16
5mm パワー キイ コネクタ
5mm Power Key Connector
Conductor (mm)
Diameter of a
素線径(mm)
Fig. 5
Fig. 6
0.16
0.18
0.18
0.18
0.18
4. Quality Assurance Provisions :
4.1 Test Conditions :
Unless otherwise specified, all the test shall be
performed in
any combination of the following test conditions.
Temperature :
Relative Humidity :
Atmospheric Pressure :
4.2 Tests :
4.2.1
The test specimens to be employed for the tests shall
be
conforming to the requirements specified in the
applicable
product drawings.
The crimped contacts shall be prepared in accordance
with
the requirements of applicable application Specification,
114-5292, Crimping of 5mm Pitch W-T-B Connector on
the wires specified in Fig. 6 of this specification.
4.2.2
The wires to be used for crimping the samples for
ｐerformance testing shall be conforming to the
requirements specified in Fig. 6.
Test Specimens :
Applicable Wires :
Conductors
Number of
素線数
11
12
20
30
50
15～35℃
45～75 %
86.6～106.6 Kpa
絶縁被覆外径(mm)
Insulation Outer
Diameter (mm)
108-5699
15 of 19
2.4
2.4
2.6
2.8
3.1