SI7300A Sanken Electric Co., SI7300A Datasheet - Page 5

• Manufacturer Part Number: SI7300A
• Description: Unipolar Driver ICs
• Manufacturer: Sanken Electric Co.

54
SI-7200M, SI-7230M, SI-7115B, SI-7300A,
SI-7330A, SI-7500A and SI-7502
For details, refer to the relevant product specifications.
(1) Tightening torque:
(2) Solvent:
(3) Silicone grease:
• Resistance against radiation
Handling Precautions
Others
Resistance against radiation was not considered in the development of these ICs
because it is assumed that they will be used in ordinary environment.
The torque to be applied in tightening screws when mounting the IC on a
heatsink should be below 49N•m.
Do not use the following solvents:
The silicone grease to be used between the aluminum base plate of the hybrid
IC and the heatsink should be any of the following:
Substances that
dissolve the package
Substances that
weaken the package
• G-746
• YG6260
• SC102
Please pay sufficient attention in selecting silicone grease since oil in some
grease may penetrate the product, which will result in an extremely short
product life.
SHINETSU CHEMICAL INDUSTRIES CO., LTD.
TOSHIBA SILICONE CO., LTD.
DOW CORNING TORAY SILICONE CO., LTD.
Chlorine-based solvents
Aromatic hydrogen compounds : Benzene, Toluene,
Ketone and Acetone group solvents
Gasoline, Benzine and Kerosene
(Note: The SI-7502 is applicable for item (2) only.)
: Trichloroethylene,
Trichloroethane, etc.
Xylene, etc.