adm6995 ETC-unknow, adm6995 Datasheet - Page 8

• Manufacturer Part Number: adm6995
• Description: Port 10/100 Mb/s Single Chip Ethiernet Switch Controller
• Manufacturer: ETC-unknow

ADM6995L
ADMtek Inc.
1.2
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Supports five 10M/100M auto-detect Half/Full duplex switch ports with TX/FX
interfaces.
Supports 2048 MAC addresses table.
Supports four queue for QoS
Supports priority features by Port-Based, 802.1p VLAN & IP TOS of packets.
Supports Store & Forward architecture and performs forwarding and filtering at non-
blocking full wire speed.
Supports buffer allocation with 256 bytes per block
Supports Aging function Enable/Disable.
Supports per port Single/Dual color mode with Power On auto diagnostic.
Supports 802.3x Flow Control pause packet for Full Duplex in case buffer is full.
Supports Back Pressure function for Half Duplex operation in case buffer is full.
Supports packet length up to 1522 bytes.
Broadcast Storming Filter function.
Supports 802.1Q VLAN. Up to 16 VLAN groups is implemented by the last four bits
of VLAN ID.
2bit MAC clone to support multiple WAN application
Supports TP interface Auto MDIX function for auto TX/RX swap by strapping-pin.
Easy Management 32bits smart counter for per port RX/TX byte/packet count, error
count and collision count.
Support PHY status output for management system.
25M Crystal only for the whole system.
128 QFP package with 0.18um technology. 1.8V/3.3V power supply.
Product Review
1-2