lan9311 Standard Microsystems Corp., lan9311 Datasheet - Page 376

• Manufacturer Part Number: lan9311
• Description: Lan9311/lan9311i Two Port 10/100 Managed Ethernet Switch With 16-bit Non-pci Cpu Interface
• Manufacturer: Standard Microsystems Corp.

Revision 1.2 (04-08-08)
14.5.3.6
BITS
31:2
1
0
RESERVED
ALR Init Done
When set, indicates that the ALR table has finished being initialized by the
reset process. The initialization is performed upon any reset that resets the
switch fabric. The initialization takes approximately 20uS. During this time,
any received packet will be dropped. Software should monitor this bit before
writing any of the ALR tables or registers.
Make Pending
When set, indicates that the Make Entry command is taking place. This bit
is cleared once the Make Entry command has finished.
Switch Engine ALR Command Status Register (SWE_ALR_CMD_STS)
This register indicates the current ALR command status.
Note 14.62 The default value of this bit is 0 immediately following any switch fabric reset and then self-
Register #:
sets to 1 once the ALR table is initialized.
1808h
DESCRIPTION
DATASHEET
376
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Size:
32 bits
TYPE
RO
RO
RO
SMSC LAN9311/LAN9311i
SS
SC
Note 14.62
DEFAULT
Datasheet
0b
-