wm8352 Wolfson Microelectronics plc, wm8352 Datasheet - Page 96

• Manufacturer Part Number: wm8352
• Description: Wolfson Audioplus? Stereo Codec With Power Management
• Manufacturer: Wolfson Microelectronics plc

WM8352
w
Figure 59 DSP/PCM Mode B, Master Mode, with TDM
DSP/PCM Mode A, Slave Mode: SLOT0 and SLOT1 are defined as shown below. The number of
BCLK cycles from the start of SLOT0 (left) to the start of SLOT1 (left) is determined by the selected
word length of the interface of the WM8352.
Figure 60 DSP/PCM Mode A, Slave Mode with TDM
DSP/PCM Mode B, Slave Mode: SLOT0 and SLOT1 are defined as shown below. The number of
BCLK cycles from the start of SLOT0 (left) to the start of SLOT1 (left) is determined by the selected
word length of the interface of the WM8352.
Figure 61 DSP/PCM Mode B, Slave Mode, with TDM
13.10.4 LOOPBACK
When the loopback feature is enabled, the audio ADC’s digital output data is looped back to the
audio DAC and converted back into an analogue signal. This is often useful for test and evaluation
purposes.
R113 (71h)
ADC Control
Table 46 Enabling loopback
ADDRESS
BIT
0
LOOPBACK
LABEL
DEFAULT
0
Digital Loopback Function
0 = No loopback.
1 = Loopback enabled, ADC data output is
fed directly into DAC data input.
DESCRIPTION
PD, June 2009, Rev 4.1
Production Data
96