uc1602i-pp-m ETC-unknow, uc1602i-pp-m Datasheet - Page 21

• Manufacturer Part Number: uc1602i-pp-m
• Description: Single-chip, Ultra-low Power Passive Matrix Lcd Controller-driver
• Manufacturer: ETC-unknow

MX I
Column Mirroring (MX) is implemented by
selecting either (CA) or (101–CA) as the RAM
column address. Changing MX affects the data
written to the RAM.
Since MX has no effect of the data already stored
in RAM, changing MX does not have immediate
effect on the displayed pattern. To refresh the
display, refresh the data stored in RAM after
setting MX.
D
During each field of display, depends on the
setting of MR, row electrodes will be scanned in a
fixed pattern at a rate of
During each row period, the signal at the column
drivers determine the ON/OFF status of the row
of pixels being scanned.
R
Icon data is always outputted via RIC electrodes
before the 1
by scanning R1 through R m , where m may be 64,
or 48 depends on the setting of MR.
Row electrode scanning orders are not affected
by Start Line (SL) or Mirror Y (MY, LC[3]). When
MY is 0, the effect of SL having a value K is to
change the mapping of R0 to the K -th bit slice of
data stored in display RAM. Visually, SL having a
non-zero value is equivalent to scrolling LCD
display up by SL rows.
RAM A
The mapping of the data store in the display
SRAM and the scanning electrodes can be
obtained by combining the fixed R m scanning
Rev. 0.54 10/12/2001
ISPLAY
OW
MPLEMENTATION
S
(80 x Mux Rate) rows/second .
CANNING
DDRESS
S
CANNING
st
row of each field. It is then followed
G
ENERATION
sequence and the following RAM address
generation formula.
During the display operation, the RAM line
address generation can be mathematically
represented as following:
Where Mod is the modular operator, and Line is
the bit slice line address of RAM to be outputted
to column drivers. Line 0 corresponds to the first
bit-slice of data in RAM.
The above Line generation formula produce the
“loop around” effect as it effectively resets Line to
0 when Line+1 reaches 64 .
Effects such as page scrolling, page swapping
can be emulated by changing SL dynamically.
MY I
Row Mirroring (MY) is implemented by reversing
the mapping order between row electrodes and
RAM, i.e. the mathematical address generation
formula becomes:
Visually, the effect of MY is equivalent to flipping
the display upside down. The data stored in
display RAM is not affected by MY.
For the 1
For the 2
Otherwise
Otherwise
MPLEMENTATION
For the 1
For the 2
where MUX = 65 or 49
Line = Icon Line (40H)
Line = SL
Line = Mod( Line +1, 64 )
Line = Icon Line (40H)
Line = Mod( SL + MUX-2 , 64 )
Line = Mod( Line-1 , 64 )
st
nd
st
nd
line period of each field
line period of each field
line period of each field
65x102 Matrix LCD Controller-Drivers
line period of each field
UC1602I
19