hb288032c5 Renesas Electronics Corporation., hb288032c5 Datasheet - Page 46

• Manufacturer Part Number: hb288032c5
• Description: Compactflash? 256 Mbyte/192 Mbyte/160 Mbyte/128 Mbyte 96 Mbyte/64 Mbyte/32 Mbyte
• Manufacturer: Renesas Electronics Corporation.

HB288256/192/160/128/096/064/032C5
22. Translate Sector (code: 87H): This card does not support by this command the function of determining
the exact number of times a user sector has been erased and programmed because this card always responds
with “00H”, though this command could provide information containing the desired cylinder, head and sector,
including its Logical Address, etc.
23. Wear level (code: F5H): This command is effectively a NOP command and only implemented for
backward compatibility. The Sector Count Register will always be returned with an 00H indicating Wear
Level is not needed.
24. Write Buffer (code: E8H): This command enables the host to overwrite contents of the Card's sector
buffer with any data pattern desired.
25. Write Long Sector (code: 32H or 33H): This command is provided for compatibility purposes and is
similar to the Write Sector(s) command except that it writes 516 bytes instead of 512 bytes.
26. Write Multiple (code: C5H): This command is similar to the Write Sectors command. Interrupts are not
presented on each sector, but on the transfer of a block which contains the number of sectors defined by Set
Multiple command.
27. Write Multiple without Erase (code: CDH): This command is similar to the Write Multiple command
with the exception that an implied erase before write operation is not performed.
28. Write Sector(s) (code: 30H or 31H): This command writes from 1 to 256 sectors as specified in the
Sector Count register. A sector count of zero requests 256 sectors. The transfer begins at the sector specified
in the Sector Number register.
29. Write Sector(s) without Erase (code: 38H): This command is similar to the Write Sector(s) command
with the exception that an implied erase before write operation is not performed.
30. Write Verify (code: 3CH): This command is similar to the Write Sector(s) command, except each sector
is verified immediately after being written.
46