PS12001ARN-0 POWERTIP [Powertip Technology], PS12001ARN-0 Datasheet - Page 24

• Manufacturer Part Number: PS12001ARN-0
• Description: OUTLINE DIMENSION & BLOCK DIAGRAM
• Manufacturer: POWERTIP [Powertip Technology]

!" Features
#" 5 x 8 and 5 x 11 dot matrix possible
#" Low power operation support:
#" -- 2.7 to 5.5V
#" Wide range of LCD driver power
#" Correspond to high speed MPU bus
#" 4-bit or 8-bit MPU interface enabled
#" 80 x 8-bit display RAM (80 characters max.)
#" 13,200-bit character generator ROM for a
#" 64 x 8-bit character generator RAM
#" 16-common x 40-segment liquid crystal
!" Description
The ST7066U dot-matrix liquid crystal display
controller and driver LSI displays alphanumeric,
Japanese kana characters, and symbols. It can be
configured to drive a dot-matrix liquid crystal display
under the control of a 4- or 8-bit microprocessor.
Since all the functions such as display RAM,
character generator, and liquid crystal driver, required
for driving a dot-matrix liquid crystal display are
internally provided on one chip, a minimal system can
be interfaced with this controller/driver.
The ST7066U has pin function compatibility with the
HD44780, KS0066 and SED1278 that allows the user
to easily replace it with an ST7066U. The ST7066U
character generator ROM is extended to generate
V2.0
Sitronix
-- 3.0 to 10V
-- 2 MHz (when V
-- 8 character fonts (5 x 8 dot)
-- 4 character fonts (5 x 11 dot)
interface
total of 240 character fonts(5 x 8 dot or 5 x 11
dot)
display driver
Product Name
ST7066U-0A
ST7066U-0B
ST7066U-0E
CC
= 5V)
1/42
#" Programmable duty cycles
#" Wide range of instruction functions:
#" Pin function compatibility with HD44780,
#" Automatic reset circuit that initializes the
#" Internal oscillator with external resistors
#" Low power consumption
#" QFP80 and Bare Chip available
240 5x8(5x11) dot character fonts for a total of 240
different character fonts. The low power supply (2.7V
to 5.5V) of the ST7066U is suitable for any portable
battery-driven product requiring low power
dissipation.
The ST7066U LCD driver consists of 16 common
signal drivers and 40 segment signal drivers which
can extend display size by cascading segment driver
ST7065 or ST7063. The maximum display size can
be either 80 characters in 1-line display or 40
characters in 2-line display. A single ST7066U can
display up to one 8-character line or two 8-character
lines.
Support Character
English / European
English / European
-- 1/8 for one line of 5 x 8 dots with cursor
-- 1/11 for one line of 5 x 11 dots & cursor
-- 1/16 for two lines of 5 x 8 dots & cursor
Display clear, cursor home, display on/off,
cursor on/off, display character blink, cursor
shift, display shift
KS0066 and SED1278
controller/driver after power on
English / Japan
Dot Matrix LCD Controller/Driver
ST
ST7066U
2001/03/01