PIC18F2480 MICROCHIP [Microchip Technology], PIC18F2480 Datasheet - Page 121

• Manufacturer Part Number: PIC18F2480
• Description: 28/40/44-Pin Enhanced Flash Microcontrollers with ECAN Technology, 10-Bit A/D and nanoWatt Technology
• Manufacturer: MICROCHIP [Microchip Technology]

REGISTER 9-5:
 2004 Microchip Technology Inc.
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
PIR2: PERIPHERAL INTERRUPT REQUEST (FLAG) REGISTER 2
bit 7
OSCFIF: Oscillator Fail Interrupt Flag bit
1 = System oscillator failed, clock input has changed to INTOSC (must be cleared in software)
0 = System clock operating
CMIF: Comparator Interrupt Flag bit
1 = Comparator input has changed (must be cleared in software)
0 = Comparator input has not changed
Unimplemented: Read as ‘0’
EEIF: Data EEPROM/Flash Write Operation Interrupt Flag bit
1 = The write operation is complete (must be cleared in software)
0 = The write operation is not complete, or has not been started
BCLIF: Bus Collision Interrupt Flag bit
1 = A bus collision occurred (must be cleared in software)
0 = No bus collision occurred
HLVDIF: High/Low-Voltage Detect Interrupt Flag bit
1 = A low-voltage condition occurred (must be cleared in software)
0 = The device voltage is above the High/Low-Voltage Detect trip point
TMR3IF: TMR3 Overflow Interrupt Flag bit
1 = TMR3 register overflowed (must be cleared in software)
0 = TMR3 register did not overflow
ECCP1IF: CCPx Interrupt Flag bit
Capture mode:
1 = A TMR1 register capture occurred (must be cleared in software)
0 = No TMR1 register capture occurred
Compare mode:
1 = A TMR1 register compare match occurred (must be cleared in software)
0 = No TMR1 register compare match occurred
PWM mode:
Unused in this mode.
Legend:
R = Readable bit
-n = Value at POR
OSCFIF
R/W-0
Note 1: These bits are available in PIC18F4X80 and reserved in PIC18F2X80 devices.
CMIF
R/W-0
(1)
PIC18F2480/2580/4480/4580
U-0
—
W = Writable bit
‘1’ = Bit is set
Preliminary
(1)
(1)
R/W-0
EEIF
BCLIF
R/W-0
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
HLVDIF
R/W-0
TMR3IF
R/W-0
x = Bit is unknown
DS39637A-page 119
ECCP1IF
R/W-0
bit 0
(1)