AT89C5122 ATMEL [ATMEL Corporation], AT89C5122 Datasheet - Page 96

• Manufacturer Part Number: AT89C5122
• Description: MICROCONTROLLER WITH USB AND SMART CARD READER INTERFACES
• Manufacturer: ATMEL [ATMEL Corporation]

Description
Serial Interface Engine (SIE)
96
AT8xC5122/23
D+
D-
The only possible value for the wMaxPacketSize in the DFU configuration is 32 bytes,
which is the size of the FIFO implemented for endpoint 0.
The USB device controller provides the hardware that the AT8xC5122D and the
AT83C5123 need to interface a USB link to a data flow stored in a double port memory
(DPRAM).
The USB controller requires a 48 MHz reference clock, which is the output of the
AT8xC5122D/23 PLL (see Section "Phase Lock Loop (PLL)", page 42) divided by a
clock prescaler. This clock is used to generate a 12 MHz full speed bit clock from the
received USB differential data and to transmit data according to full speed USB device
tolerance. Clock recovery is done by a Digital Phase Locked Loop (DPLL) block, which
is compliant with the jitter specification of the USB bus.
The Interface Engine (SIE) block performs NRZI encoding and decoding, bit stuffing,
CRC generation and checking, and the serial-parallel data conversion. The Universal
Function Interface (UFI) performs the interface between the data flow and the Dual Port
Ram
Figure 49. USB Device Controller Block Diagram
The SIE performs the following functions:
•
•
•
•
•
•
•
NRZI data encoding and decoding.
Bit stuffing and unstuffing.
CRC generation and checking.
Handshakes.
TOKEN type identifying.
Address checking.
Clock generation (via DPLL).
USB
D+/D-
Buffer
DPLL
SIE
48 MHz
12MHz
+/- 0.25%
UFI
C51
Microcontroller
Interface
Up to 48 MHz
UC_SYSCLK
4202D–SCR–06/05