HD6412320 RENESAS [Renesas Technology Corp], HD6412320 Datasheet - Page 275

no-image

HD6412320

Manufacturer Part Number
HD6412320
Description
Renesas 16-Bit Single-Chip Microcomputer H8S Family H8S-2300 Series
Manufacturer
RENESAS [Renesas Technology Corp]
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
HD6412320VF25
Manufacturer:
HITACHI
Quantity:
1 045
Part Number:
HD6412320VF25IV
Manufacturer:
SEIKO
Quantity:
4 100
Part Number:
HD6412320VF25IV
Manufacturer:
RENESAS/瑞萨
Quantity:
20 000
Part Number:
HD6412320VF25V
Manufacturer:
RENESAS
Quantity:
1 592
Part Number:
HD6412320VTE25
Manufacturer:
HIT
Quantity:
1 000
Part Number:
HD6412320VTE25
Manufacturer:
HITACHI/日立
Quantity:
20 000
Part Number:
HD6412320VTE25V
Manufacturer:
RENESAS/瑞萨
Quantity:
20 000
Bit 14—Full Address Enable 0 (FAE0): Specifies whether channel 0 is to be used in short
address mode or full address mode.
In full address mode, channels 0A and 0B are used together as a single channel.
Bit 14
FAE0
0
1
Bits 13 and 12—Reserved: Can be read or written to. Only 0 should be written to these bits.
Bits 11 and 9—Data Transfer Acknowledge (DTA): These bits enable or disable clearing, when
DMA transfer is performed, of the internal interrupt source selected by the data transfer factor
setting.
When DTE = 1 and DTA = 1, the internal interrupt source selected by the data transfer factor
setting is cleared automatically by DMA transfer. When DTE = 1 and DTA = 1, the internal
interrupt source selected by the data transfer factor setting does not issue an interrupt request to the
CPU or DTC.
When DTE = 1 and DTA = 0, the internal interrupt source selected by the data transfer factor
setting is not cleared when a transfer is performed, and can issue an interrupt request to the CPU
or DTC in parallel. In this case, the interrupt source should be cleared by the CPU or DTC
transfer.
When DTE = 0, the internal interrupt source selected by the data transfer factor setting issues an
interrupt request to the CPU or DTC regardless of the DTA bit setting.
The state of the DTME bit does not affect the above operations.
Bit 11—Data Transfer Acknowledge 1 (DTA1): Enables or disables clearing, when DMA
transfer is performed, of the internal interrupt source selected by the channel 1 data transfer factor
setting.
Bit 11
DTA1
0
1
Description
Short address mode
Full address mode
Description
Clearing of selected internal interrupt source at time of DMA transfer is disabled
Clearing of selected internal interrupt source at time of DMA transfer is enabled
Section 7 DMA Controller (Not Supported in the H8S/2321)
Rev.6.00 Sep. 27, 2007 Page 245 of 1268
REJ09B0220-0600
(Initial value)
(Initial value)

Related parts for HD6412320