HD6412320 RENESAS [Renesas Technology Corp], HD6412320 Datasheet - Page 595

• Manufacturer Part Number: HD6412320
• Description: Renesas 16-Bit Single-Chip Microcomputer H8S Family H8S-2300 Series
• Manufacturer: RENESAS [Renesas Technology Corp]

Bit 4—A/D Trigger Enable (ADTE) (TCSR0 Only): Selects enabling or disabling of A/D
converter start requests by compare match A.
In TCSR1, this bit is reserved: it is always read as 1 and cannot be modified.
Bit 4
ADTE
0
1
Bits 3 to 0—Output Select 3 to 0 (OS3 to OS0): These bits specify how the timer output level is
to be changed by a compare match of TCOR and TCNT.
Bits OS3 and OS2 select the effect of compare match B on the output level, bits OS1 and OS0
select the effect of compare match A on the output level, and both of them can be controlled
independently.
Note, however, that priorities are set such that: toggle output > 1 output > 0 output. If compare
matches occur simultaneously, the output changes according to the compare match with the higher
priority.
Timer output is disabled when bits OS3 to OS0 are all 0.
After a reset, the timer output is 0 until the first compare match event occurs.
Bit 3
OS3
0
1
Bit 1
OS1
0
1
Bit 2
OS2
0
1
0
1
Bit 0
OS0
0
1
0
1
Description
A/D converter start requests by compare match A are disabled
A/D converter start requests by compare match A are enabled
Description
No change when compare match B occurs
0 is output when compare match B occurs
1 is output when compare match B occurs
Output is inverted when compare match B occurs (toggle output)
Description
No change when compare match A occurs
0 is output when compare match A occurs
1 is output when compare match A occurs
Output is inverted when compare match A occurs (toggle output)
Rev.6.00 Sep. 27, 2007 Page 565 of 1268
Section 12 8-Bit Timers
REJ09B0220-0600
(Initial value)
(Initial value)
(Initial value)