M95080-DW6 STMICROELECTRONICS [STMicroelectronics], M95080-DW6 Datasheet - Page 20

• Manufacturer Part Number: M95080-DW6
• Description: 16Kbit and 8Kbit Serial SPI Bus EEPROM With High Speed Clock
• Manufacturer: STMICROELECTRONICS [STMicroelectronics]

M95160, M95080
POWER-UP AND DELIVERY STATE
Power-up State
After Power-up, the device is in the following state:
–
–
–
–
–
The SRWD, BP1 and BP0 bits of the Status Reg-
ister are unchanged from the previous power-
down (they are non-volatile bits).
20/40
Standby Power mode
deselected (after Power-up, a falling edge is
required on Chip Select (S) before any
instructions can be started).
not in the Hold Condition
the Write Enable Latch (WEL) is reset to 0
Write In Progress (WIP) is reset to 0
Initial Delivery State
The device is delivered with the memory array set
at all 1s (FFh). The Status Register Write Disable
(SRWD) and Block Protect (BP1 and BP0) bits are
initialized to 0.