NS16C2552TVA NSC [National Semiconductor], NS16C2552TVA Datasheet - Page 18

• Manufacturer Part Number: NS16C2552TVA
• Description: Dual UART with 16-byte/64-byte FIFOs and up to 5 Mbit/s Data Rate
• Manufacturer: NSC [National Semiconductor]

www.national.com
6.0 Register Set
6.7 MODEM CONTROL REGISTER (MCR)
This register controls the interface with the MODEM or data
set (or a peripheral device emulating a MODEM). There is a
Bit
7
6
5
Clk Divider
Bit Name
IR Mode
Xon-Any
Ena
Sel
Sel
R/W
R/W
R/W
R/W
Def
(Continued)
0
0
0
Clock Divider Select
This bit selects the clock divider from crystal or oscillator input. The divider output
connects to the Baud Rate Generator.
1 = Divide XIN frequency by 4.
0 = Divide XIN frequency by 1 (default).
Infrared Encoder/Decoder Select
This bit selects standard modem or IrDA interface.
1 = Infrared IrDA Tx/Rx. The data input and output levels complies to the IrDA infrared
interface. The Tx output is at logic 0 during the idle state.
0 = Standard modem Tx/Rx (default).
Xon-Any Enable
This bit enables Xon-Any feature.
1 = Enable Xon-Any function. When Xon/Xoff flow control is enabled, the transmission
resumes when any character is received. The received character is loaded into the Rx
FIFO except for Xon or Xoff characters.
0 = Disable Xon-Any function (default).
FIGURE 1. Internal Clock Dividers
TABLE 11. MCR (0x4)
18
clock divider for each channel. Each is capable of taking a
common clock input from DC to 80 MHz and dividing the
clock frequency by 1 (default) or 4 depending on the MCR[7]
value. The clock divider and the internal clock division flow is
shown in Figure 1.
20204803
Description