EVB-B1+ WIZnet, EVB-B1+ Datasheet - Page 24

• Manufacturer Part Number: EVB-B1+
• Description: Development Boards & Kits - ARM W3150A+EVAL BOARD BASED ON AVR
• Manufacturer: WIZnet

Specifications of EVB-B1+

• Rohs: yes
• Product: Evaluation Boards
• Interface Type: RS-232, SPI
• Operating Supply Voltage: 3.3 V, 5 V
• Data Bus Width: 8 bit
• Dimensions: 50 mm x 40 mm
• Processor Series: ATmega128

<Fig 2.15> shows the real example of sending the Ping Request to the destination and receiving the Ping
Reply.
To terminate the Ping Application type, type “exit” at the “PING>” prompt.
2.4.2.
2.4.2.1.
DHCP Client Application is an application that dynamically assigns network information for EVB B/D from
DHCP Server. To test DHCP Client, first of all, W3150A
“DHCP Client” using [Manager>>Channel Config>>0th Channel] Menu.
Refer to
<Fig 2.16> is the screen that DHCP Client successfully obtains network information. Note that DHCP Client
will be set with default network information if DHCP Server does not exist or is not able to obtain network
information from DHCP Server.
Chapter 2.4.1.2
EVB B/D Test Applications
DHCP Client
© Copyright 2006 WIZnet Co., Inc. All rights reserved.
<Fig 2.15: Ping Application Test>
+
1
st
channel application type must be set up as
14