M24C64-WBN6P STMicroelectronics, M24C64-WBN6P Datasheet - Page 23

• Manufacturer Part Number: M24C64-WBN6P
• Description: IC EEPROM 64KBIT 400KHZ 8DIP
• Manufacturer: STMicroelectronics

Specifications of M24C64-WBN6P

• Format - Memory: EEPROMs - Serial
• Memory Type: EEPROM
• Memory Size: 64K (8K x 8)
• Speed: 400kHz
• Interface: I²C, 2-Wire Serial
• Voltage - Supply: 2.5 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-DIP (0.300", 7.62mm)
• Organization: 8 K x 8
• Interface Type: I2C
• Maximum Clock Frequency: 0.4 MHz
• Access Time: 900 ns
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.5 V
• Maximum Operating Current: 2 mA
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 2.5 V, 5.5 V
• Memory Organization: 8K X 8
• Clock Speed: 400MHz
• No. Of Pins: 8
• Operating Temperature Range: -40°C To +85°C
• Ic Generic Number: 24C64
• Memory Voltage, Vcc: 2.5V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-8575; M24C64-WBN6P

M24C64-DF, M24C64-W, M24C64-R, M24C64-F
5
6
Initial delivery state
The device is delivered with all bits in the memory array set to 1 (each byte contains FFh).
Maximum rating
Stressing the device outside the ratings listed in
the device. These are stress ratings only, and operation of the device at these, or any other
conditions outside those indicated in the Operating sections of this specification, is not
implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability. Refer also to the STMicroelectronics SURE Program and other relevant
quality documents.
Table 6.
1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb assembly), the ST ECOPACK®
2. T
3. 3000V on devices identified with process letter K.
4. AEC-Q100-002 (compliant with JEDEC Std JESD22-A114A, C1=100pF, R1=1500 Ω, R2=500 Ω)
Symbol
V
7191395 specification, and the European directive on Restrictions on Hazardous Substances (RoHS)
2002/95/EU.
T
T
LEAD
ESD
V
LEAD
V
I
T
STG
OL
CC
IO
A
(3)
max must not be applied for more than 10 s.
Absolute maximum ratings
Ambient operating temperature
Storage temperature
Lead temperature during soldering
PDIP-specific lead temperature during soldering
Input or output range
DC output current (SDA = 0)
Supply voltage
Electrostatic discharge voltage (human body model)
Doc ID 16891 Rev 23
Parameter
Table 6
may cause permanent damage to
(4)
–3000
–0.50
–0.50
Min.
–40
–65
see note
-
Initial delivery state
260
Max.
3000
130
150
(1)
6.5
6.5
5
(2)
Unit
mA
°C
°C
°C
°C
V
V
V
23/44