TLE4226G Infineon Technologies, TLE4226G Datasheet - Page 16

• Manufacturer Part Number: TLE4226G
• Description: IC SWITCH LOW SIDE 6CHAN PDSO-24
• Manufacturer: Infineon Technologies
• Type: Low Sider

Specifications of TLE4226G

• Input Type: Non-Inverting
• Number Of Outputs: 6
• Current - Output / Channel: 50mA
• Current - Peak Output: 70mA
• Voltage - Supply: 4.75 V ~ 5.25 V
• Operating Temperature: -40°C ~ 110°C
• Mounting Type: Surface Mount
• Package / Case: DSO-24
• Packages: P-DSO-24
• Thermal Class: Standard plastic
• Id Nom: -
• Pin Count: 24.0 Pins
• Channels: 6.0
• Comment: general purpose, industrial applications
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• On-state Resistance: -
• Other names: SP000011756; TLE4226G; TLE4226GNT; TLE4226GT; TLE4226GTR

TLE 4226 G
Edition 2002-10-21
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81541 München
©
Infineon Technologies AG 2000.
All Rights Reserved.
Attention please!
The information herein is given to describe
certain components and shall not be consid-
ered as warranted characteristics.
Terms of delivery and rights to technical
change reserved.
We hereby disclaim any and all warranties,
including but not limited to warranties of non-
infringement, regarding circuits, descriptions
and charts stated herein.
Infineon Technologiesis an approved CECC
manufacturer.
Information
For further information on technology, deliv-
ery terms and conditions and prices please
contact your nearest Infineon Technologies
Office in Germany or our Infineon Technolo-
gies Representatives worldwide (see ad-
dress list).
Warnings
Due to technical requirements components
may contain dangerous substances. For in-
formation on the types in question please
contact your nearest Infineon Technologies
Office.
Infineon Technologies Components may only
be used in life-support devices or systems
with the express written approval of Infineon
Technologies, if a failure of such components
can reasonably be expected to cause the fail-
ure of that life-support device or system, or to
affect the safety or effectiveness of that de-
vice or system. Life support devices or sys-
tems are intended to be implanted in the hu-
man body, or to support and/or maintain and
sustain and/or protect human life. If they fail, it
is reasonable to assume that the health of the
user or other persons may be endangered.
Data Sheet
16
2002-10-21