BTS410E2 Infineon Technologies, BTS410E2 Datasheet - Page 16

• Manufacturer Part Number: BTS410E2
• Description: IC SWITCH PWR 65V TO-220AB-5
• Manufacturer: Infineon Technologies
• Series: PROFET®r
• Type: High Sider

Specifications of BTS410E2

• Input Type: Non-Inverting
• Number Of Outputs: 1
• On-state Resistance: 190 mOhm
• Current - Output / Channel: 1.8A
• Current - Peak Output: 12A
• Voltage - Supply: 4.7 V ~ 42 V
• Operating Temperature: -40°C ~ 150°C
• Mounting Type: Through Hole
• Package / Case: TO-220-5 (Bent and Staggered Leads)
• Device Type: High Side
• Peak Output Current: 1.8A
• Input Delay: 125µs
• Output Delay: 85µs
• Supply Voltage Range: 4.7V To 42V
• Driver Case Style: TO-220AB
• No. Of Pins: 5
• Operating Temperature Range: -40°C
• Switch Type: High Side
• Power Switch Family: BTS 410 E2
• Input Voltage: -0.5 to 6V
• Power Switch On Resistance: 190mOhm
• Output Current: 1.6A
• Mounting: Through Hole
• Supply Current: 1mA
• Package Type: TO-220AB
• Operating Temperature (min): -40C
• Operating Temperature (max): 150C
• Operating Temperature Classification: Automotive
• Pin Count: 5 +Tab
• Power Dissipation: 50W
• Rohs Compliant: No
• Output Resistance: 0.19ohm
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant, Contains lead / RoHS non-compliant
• Other names: BTS410E2; BTS410E2IN; BTS410E2NK; SP000011233

BTS 410 E2
Published by
Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81669 München
© Infineon Technologies AG 2001
All Rights Reserved.
Attention please!
The information herein is given to describe certain
components and shall not be considered as a guarantee of
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not
limited to warranties of non-infringement, regarding circuits,
descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and
conditions and prices please contact your nearest Infineon
Technologies Office in Germany or our Infineon
Technologies Representatives worldwide (see address list).
Warnings
Due to technical requirements components may contain
dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies
Office.
Infineon Technologies Components may only be used in life-
support devices or systems with the express written
approval of Infineon Technologies, if a failure of such
components can reasonably be expected to cause the
failure of that life-support device or system, or to affect the
safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the
human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to
assume that the health of the user or other persons may be
endangered.
Semiconductor Group
16
2003-Oct-01