TDA21102 Infineon Technologies, TDA21102 Datasheet - Page 8

• Manufacturer Part Number: TDA21102
• Description: IC DRIVER DUAL HS MOSFET PDSO-14
• Manufacturer: Infineon Technologies
• Series: CoreControl™r
• Type: High Sider

Specifications of TDA21102

• Input Type: Non-Inverting
• Number Of Outputs: 4
• Current - Output / Channel: 4A
• Current - Peak Output: 4A
• Voltage - Supply: 10.8 V ~ 13.2 V
• Operating Temperature: -25°C ~ 150°C
• Mounting Type: Surface Mount
• Package / Case: DSO-14
• Input / Supply Voltage (max): 13.2 V
• Input / Supply Voltage (min): 5 V
• Maximum Power Dissipation: 0.9 W
• Supply Current: 3.8 mA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• On-state Resistance: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: SP000014699; SP000080999; TDA21102T

CoreControl
Data Sheet
TDA21102
TM
Published by
Infineon Technologies AG,
Bereichs Kommunikation
St.-Martin-Strasse 53,
D-81541 München
 Infineon Technologies AG 1999
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement,
regarding circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your
nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives
worldwide (see address list).
Warnings
Due to technical requirements components may contain dangerous substances.
For information on the types in question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the
express written approval of Infineon Technologies, if a failure of such components can reasonably be
expected to cause the failure of that life-support device or system, or to affect the safety or
effectiveness of that device or system Life support devices or systems are intended to be implanted in
the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other persons may be endangered.
Rev. 2.0
Page 8
Aug 31, 2004