DW025ABK-M Lineage Power, DW025ABK-M Datasheet - Page 13

• Manufacturer Part Number: DW025ABK-M
• Description: CONV DC/DC +5/+-12V 25W OUT
• Manufacturer: Lineage Power
• Series: DW025r
• Type: Isolated with Remote On/Offr

Specifications of DW025ABK-M

• Output: 5V, ±12V
• Number Of Outputs: 3
• Power (watts): 25W
• Mounting Type: Through Hole
• Voltage - Input: 36 ~ 75V
• Package / Case: 9-DIP Module
• 1st Output: 5 VDC @ 5A
• 2nd Output: 12 VDC @ 1A
• 3rd Output: -12 VDC @ 1A
• Size / Dimension: 2.80" L x 2.40" W x 0.50" H (71.1mm x 61mm x 12.7mm)
• Power (watts) - Rated: 25W
• Operating Temperature: -40°C ~ 100°C
• Efficiency: 82%
• Approvals: CE, CSA, UL, VDE
• Product: Isolated
• Output Power: 25 W
• Input Voltage Range: 36 V to 75 V
• Output Voltage (channel 1): 5 V
• Output Current (channel 1): 5 A
• Output Voltage (channel 2): 12 V
• Output Current (channel 2): 1 A
• Output Voltage (channel 3): - 12 V
• Output Current (channel 3): 1 A
• Isolation Voltage: 500 V
• Package / Case Size: DIP
• Output Type: Isolated
• Output Voltage: 5 V
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• 4th Output: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Data Sheet
April 2008
Thermal Considerations
The 25 W triple output power modules are designed to
operate in a variety of thermal environments. As with
any electronic component, sufficient cooling must be
provided to ensure reliable operation. Heat dissipating
components inside the module are thermally coupled
to the case to enable heat removal by conduction, con-
vection, and radiation to the surrounding environment.
Lineage Power
Note: Dimensions are in millimeters and (inches). Drawing is not to scale.
CONNECTORS TO
LOADS, POWER
SUPPLIES, AND
6.35 (0.25) TALL
DATALOGGER,
(4.00)
101.6
27.9
(1.1)
Figure 22. Thermal Test Setup
dc-dc POWER MODULE
MADE IN USA
203.2 (8.00)
AIRFLOW
27.9
(1.1)
12.7 (0.50)
CW025 Triple-Output-Series Power Modules:
MEASURE CASE
TEMPERATURE AT
THIS POINT
(2.00)
50.8
The thermal data presented is based on measure-
ments taken in a wind tunnel. The test setup shown in
Figure 22 was used to collect data. Actual performance
can vary depending on the particular application
environment.
203.2
(8.00)
36 Vdc to 75 Vdc Input; 25 W
FLOW
AIR-
9.7 (0.38)
19.1 (0.75)
12.7 (0.50)
WIND TUNNEL WALL
AIR VELOCITY PROBE
AMBIENT TEMPERATURE
THERMOCOUPLE
13
8-866(C).b