CONVE DC/DC 0.75 3.63V @ 10A SMD

ATH010A0X3-SRZ

Manufacturer Part NumberATH010A0X3-SRZ
DescriptionCONVE DC/DC 0.75 3.63V @ 10A SMD
ManufacturerLineage Power
SeriesAustin Lynx™ II
TypePoint of Load (POL) Non-Isolated with Remote On/Off
ATH010A0X3-SRZ datasheet
 


Specifications of ATH010A0X3-SRZ

Output0.75 ~ 3.63VNumber Of Outputs1
Power (watts)36WMounting TypeSurface Mount
Voltage - Input2.4 ~ 5.5VPackage / Case7-SMD Module
1st Output0.75 ~ 3.63 VDC @ 10ASize / Dimension1.30" L x 0.53" W x 0.33" H (33mm x 13.5mm x 8.3mm)
Power (watts) - Rated36WOperating Temperature-40°C ~ 85°C
Efficiency95%ApprovalsCSA, EN, UL, VDE
Output Power22 WInput Voltage Range2.4 V to 5.5 V
Output Voltage (channel 1)0.75 V to 3.63 VOutput Current (channel 1)6 A
Package / Case SizeSMDOutput TypeNon-Isolated
Output Voltage0.75 V to 3.63 VProductNon-Isolated / POL
Lead Free Status / RoHS StatusLead free / RoHS Compliant3rd Output-
2nd Output-Other names555-1081-2
CC109104543
1
Page 1
2
Page 2
3
Page 3
4
Page 4
5
Page 5
6
Page 6
7
Page 7
8
Page 8
9
Page 9
10
Page 10
11
12
13
14
15
16
17
18
19
20
21
Page 1/21

Download datasheet (590Kb)Embed
Next
Data Sheet
October 2, 2009
Austin Lynx
2.4Vdc –5.5Vdc input; 0.75Vdc to 3.63Vdc Output;10A Output Current
RoHS Compliant
EZ-SEQUENCE
Applications
Distributed power architectures
Intermediate bus voltage applications
Telecommunications equipment
Servers and storage applications
Networking equipment
Enterprise Networks
Latest generation IC’s (DSP, FPGA, ASIC) and
Microprocessor powered applications
Description
TM
Austin Lynx
II SMT (surface mount technology) power modules are non-isolated DC-DC converters that can
deliver up to 10A of output current with full load efficiency of 95% at 3.3V output. These modules provide a
precisely regulated output voltage programmable via an external resistor from 0.75Vdc to 3.63Vdc over a wide
range of input voltage (V
= 2.4 – 5.5Vdc). The Austin Lynx
IN
TM
SEQUENCE
that enable designers to implement various types of output voltage sequencing when powering
multiple voltages on a board.
*
UL is a registered trademark of Underwriters Laboratories, Inc.
CSA is a registered trademark of Canadian Standards Association.
VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
TM
II SMT Non-isolated Power Modules:
Features
Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
Flexible output voltage sequencing EZ-
TM
SEQUENCE
Delivers up to 10A output current
High efficiency – 95% at 3.3V full load (V
TM
Small size and low profile:
33.0 mm x 13.5 mm x 8.28 mm
(1.30 in x 0.53 in x 0.326 in)
Low output ripple and noise
High Reliability:
Calculated MTBF = 15.7M hours at 25
Constant switching frequency (300 kHz)
Output voltage programmable from 0.75 Vdc to
3.63Vdc via external resistor
Line Regulation: 0.3% (typical)
Load Regulation: 0.4% (typical)
Temperature Regulation: 0.4 % (typical)
Remote On/Off
Remote sense
Output overcurrent protection (non-latching)
Wide operating temperature range (-40°C to 85°C)
UL* 60950-1Recognized, CSA
03 Certified, and VDE
Licensed
ISO** 9001 and ISO 14001 certified manufacturing
facilities
TM
II series has a sequencing feature, EZ-
= 5.0V)
IN
o
C Full-load
C22.2 No. 60950-1-
0805:2001-12 (EN60950-1)
Document No: DS03-105 ver. 1.04
PDF name: lynx_II_smt_ds.pdf

ATH010A0X3-SRZ Summary of contents

  • Page 1

    Data Sheet October 2, 2009 Austin Lynx 2.4Vdc –5.5Vdc input; 0.75Vdc to 3.63Vdc Output;10A Output Current RoHS Compliant EZ-SEQUENCE Applications Distributed power architectures Intermediate bus voltage applications Telecommunications equipment Servers and storage applications Networking equipment Enterprise Networks Latest generation IC’s ...

  • Page 2

    Data Sheet October 2, 2009 2.4 – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 10A output current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, ...

  • Page 3

    Data Sheet October 2, 2009 2.4 – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 10A output current Electrical Specifications (continued) Parameter Output Voltage Set-point ( =25°C) IN IN, min O O, max A Output Voltage ...

  • Page 4

    Data Sheet October 2, 2009 2.4 – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 10A output current Electrical Specifications (continued) Parameter Dynamic Load Response (dIo/dt=2.5A/μ =25°C) IN IN, nom A Load Change from Io= 50% ...

  • Page 5

    Data Sheet October 2, 2009 2.4 – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 10A output current Feature Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. See Feature Descriptions for additional information. Parameter ...

  • Page 6

    Data Sheet October 2, 2009 2.4 – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 10A output current Characteristic Curves The following figures provide typical characteristics for the Austin Lynx 2.5 5 OUTPUT CURRENT, ...

  • Page 7

    Data Sheet October 2, 2009 2.4 – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 10A output current Characteristic Curves (continued) The following figures provide typical characteristics for the Austin Lynx ...

  • Page 8

    Data Sheet October 2, 2009 2.4 – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 10A output current Characteristic Curves (continued) The following figures provide typical characteristics for the Austin Lynx TIME, t (20μs/div) Figure 13. Transient Response to Dynamic Load Change ...

  • Page 9

    Data Sheet October 2, 2009 2.4 – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 10A output current Characteristic Curves (continued) The following figures provide thermal derating curves for the Austin Lynx 100 LFM 0 ...

  • Page 10

    Data Sheet October 2, 2009 2.4 – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 10A output current Test Configurations TO OSCILLOSCOPE L TEST 1μ 1000μF S Electrolytic 2x100μF E.S.R.<0.1Ω Tantalum @ 20°C 100kHz NOTE: Measure input reflected ripple ...

  • Page 11

    Data Sheet October 2, 2009 2.4 – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 10A output current Design Considerations (continued) Output Filtering TM The Austin Lynx II SMT module is designed for low output ripple voltage and will meet the maximum ...

  • Page 12

    Data Sheet October 2, 2009 2.4 – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 10A output current Feature Description Remote On/Off TM The Austin Lynx II SMT power modules feature an On/Off pin for remote On/Off operation. Two On/Off logic options ...

  • Page 13

    ... The POL Programming Tool, available at under the Design Tools section, also calculates the values of R LOAD margin-up voltage and % margin. Please consult your local Lineage Power technical representative for additional R trim details. Austin Lynx or Lynx II Series Open 41 ...

  • Page 14

    ... When pre-bias immunity during start- required, the EZ-SEQUENCE feature must be disabled. For additional guidelines on using EZ- TM SEQUENCE feature of Austin Lynx Lineage Power technical representative for preliminary application note on output voltage sequencing using Austin Lynx II series. LINEAGE POWER TM Austin Lynx II SMT Non-isolated Power Modules: ...

  • Page 15

    Data Sheet October 2, 2009 2.4 – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 10A output current Thermal Considerations Power modules operate in a variety of thermal environments; however, sufficient cooling should always be provided to help ensure reliable operation. Considerations ...

  • Page 16

    Data Sheet October 2, 2009 2.4 – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 10A output current Mechanical Outline Dimensions are in millimeters and (inches). Tolerances: x.x mm ± 0.5 mm (x.xx in. ± 0.02 in.) [unless otherwise indicated] x.xx mm ...

  • Page 17

    Data Sheet October 2, 2009 2.4 – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 10A output current Recommended Pad Layout Dimensions are in millimeters and (inches). Tolerances: x.x mm ± 0.5 mm (x.xx in. ± 0.02 in.) [unless otherwise indicated] x.xx ...

  • Page 18

    Data Sheet October 2, 2009 2.4 – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 10A output current Packaging Details TM The Austin Lynx II SMT version is supplied in tape & reel as standard. Modules are shipped in quantities of 250 ...

  • Page 19

    Data Sheet October 2, 2009 2.4 – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 10A output current Surface Mount Information Pick and Place TM The Austin Lynx II SMT modules use an open frame construction and are designed for a fully ...

  • Page 20

    Data Sheet October 2, 2009 2.4 – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 10A output current Surface Mount Information Lead Free Soldering The –Z version Austin Lynx II SMT modules are lead- free (Pb-free) and RoHS compliant and are both ...

  • Page 21

    ... Please contact your Lineage Power Sales Representative for pricing, availability and optional features. Table 2. Device Codes Input Voltage Device Code Range ATH010A0X3-SR 2.4 – 5.5Vdc ATH010A0X3-SRZ 2.4 – 5.5Vdc ATH010A0X43-SR 2.4 – 5.5Vdc ATH010A0X43-SRZ 2.4 – 5.5Vdc -Z refers to RoHS compliant codes World Wide Headquarters ...