HS1582ECH61H Renesas Electronics America, HS1582ECH61H Datasheet - Page 21

• Manufacturer Part Number: HS1582ECH61H
• Description: DEV EMULATOR PCB ADAPTER FP-120B
• Manufacturer: Renesas Electronics America

Specifications of HS1582ECH61H

• Accessory Type: User Interface Cable
• For Use With/related Products: H8SX/1582
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.2.3
Align pin 1 on the IC socket for an PLQP0120LA-A package on the user system with pin 1 on the
user system interface cable head, and insert the user system interface cable head into the IC socket on
the user system, as shown in figure 4.
2.2.4
1. Use a screwdriver whose head matches the screw head.
2. The tightening torque must be 0.054 N•m or less.
3. If the emulator does not operate correctly, cracks might
Inserting Cable Head
Fastening Cable Head
Check the location of pin 1 before inserting.
If the applied torque cannot be accurately measured,
stop tightening when the force required to turn the screw
becomes significantly greater than that needed when first
tightening. If a screw is tightened too much, the screw
head may break or an IC socket contact error may be
caused by a crack in the IC socket solder.
have occurred in the solder. Check conduction with
a tester and re-solder the IC socket if necessary.
CAUTION
CAUTION
Rev. 3.00 Sep. 08, 2008 Page 7 of 18
Section 2 Connection Procedures
REJ10J1396-0300