HS1582ECH61H Renesas Electronics America, HS1582ECH61H Datasheet - Page 31

• Manufacturer Part Number: HS1582ECH61H
• Description: DEV EMULATOR PCB ADAPTER FP-120B
• Manufacturer: Renesas Electronics America

Specifications of HS1582ECH61H

• Accessory Type: User Interface Cable
• For Use With/related Products: H8SX/1582
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

1. Make sure that pin 1 on the user system IC socket is correctly aligned with pin 1 on the cable
2. This user system interface cable is specifically designed for the HS1527KEPH60H emulator.
3. To prevent breaking of wires in the cable body, do not place heavy or sharp metal objects on
4. While the emulator station is connected to the user system with the user system interface cable,
5.
6. A level-shift circuit with AVcc0 and AVcc1 is mounted on the user system interface cable, as
head before inserting the cable head into the user system IC socket.
Do not use this cable with any other emulator station.
the user system interface cable.
force must not be applied to the cable head. Place the emulator station, user system interface
cable, and user system as shown in the example in figure 11.
shown in figure 13. At shipment, the jumper pin is inserted in the side of pins 1 and 2 of the
The P1 short connector is used for testing. Do not remove the jumper pin that is inserted in
the side of pins 1 and 2.
Figure 11 User System Interface Cable Location Example
Emulator's front-end unit
Figure 12 P1 and P4 Short Connectors
Section 5 Notice
3
P1
1
Place components so that the cable body and cable head are
parallel to the user system.
Cable
1
P4
3
Rev. 3.00 Sep. 08, 2008 Page 17 of 18
User system
REJ10J1396-0300
Section 5 Notice
Cable head is parallel
to emulator station
Cable head is parallel
to user system