HS1582ECH61H Renesas Electronics America, HS1582ECH61H Datasheet - Page 29

• Manufacturer Part Number: HS1582ECH61H
• Description: DEV EMULATOR PCB ADAPTER FP-120B
• Manufacturer: Renesas Electronics America

Specifications of HS1582ECH61H

• Accessory Type: User Interface Cable
• For Use With/related Products: H8SX/1582
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

1. Turn on the emulator according to the procedures described in the H8SX/1650 E6000H Emulator
2. Verify the user system interface cable connections by checking the pin states with the CHECK
3. The emulator connected to this user system interface cable supports three kinds of clock sources
User's Manual (HS1650EPH60HE).
command (emulator command). If an error is detected, recheck the soldered IC socket and the
location of pin 1.
as the MCU clock: an emulator internal clock, an external clock on the user system, and a crystal
oscillator to be mounted on the EV-chip board. For details, refer to the H8SX/1650 E6000H
Emulator User's Manual (HS1650EPH60HE).
⎯ To use the emulator internal clock
⎯ To use the external clock on the user system
⎯ To use the crystal oscillator mounted on the EV-chip board
Figure 10 shows the oscillator circuit on the user system interface cable.
Select the clock in the emulator by using the CLOCK command (emulator command).
Select the external clock with the CLOCK command (emulator command). Supply the
external clock from the user system to the emulator by inputting the external clock from the
EXTAL terminal on the cable head or connecting a crystal oscillator to the EXTAL and
XTAL terminals. For details, refer to the H8SX/1520 Group Hardware Manual.
Install a crystal oscillator into the crystal oscillator terminals on the EV-chip board.
Section 4 Verifying Operation
EXTAL
Figure 10 Oscillator Circuit
HCU04
1 MΩ
XTAL
270 Ω
HCU04
To E6000H
emulator
Rev. 3.00 Sep. 08, 2008 Page 15 of 18
Section 4 Verifying Operation
REJ10J1396-0300