HS2214ECB61H Renesas Electronics America, HS2214ECB61H Datasheet - Page 15

• Manufacturer Part Number: HS2214ECB61H
• Description: DEV EMULATOR PCB ADAPTOR
• Manufacturer: Renesas Electronics America

Specifications of HS2214ECB61H

• Accessory Type: User Interface Cable
• For Use With/related Products: H8S/2214
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.2.3
The user system interface cable (HS2214ECB61H) head and the IC socket for the TBP-112 package
on the user system have no pin dedicated for alignment. Use the follow procedure to fasten the
cable head.
1. Insert two screws (M1.6 x 8 mm) to
match, respectively.
1. Use the screwdriver whose head matches the screw
2. The tightening torque must be 0.054 N•m or less.
3. If the emulator does not operate correctly, cracks might
Fastening Cable Head
head.
If the applied torque cannot be accurately measured,
stop tightening when the force required to turn the screw
becomes significantly greater than that needed when first
tightening. If a screw is tightened too much, the screw
head may break or an IC socket contact error may be
caused by a crack in the IC socket solder.
have occurred in the solder.
2
3
’
’
Figure 4 Fastening Cable Head Procedure (1)
1
4
’
’
CAUTION
and , and screw it a little so that holes at - ' and - '
2
3
1
4
9