HS2214ECB61H Renesas Electronics America, HS2214ECB61H Datasheet - Page 9

• Manufacturer Part Number: HS2214ECB61H
• Description: DEV EMULATOR PCB ADAPTOR
• Manufacturer: Renesas Electronics America

Specifications of HS2214ECB61H

• Accessory Type: User Interface Cable
• For Use With/related Products: H8S/2214
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.1
To connect the cable body to the emulator station, follow the instructions below.
1. Make sure the user system and emulator station are turned off.
2. After making sure the direction of the cable body connector is correct, firmly insert the cable
body connector into the emulator station socket (figure 2).
will result in a FIRE HAZARD and will damage the user
system and the emulator product or will result in
PERSONAL INJURY. The USER PROGRAM will be
LOST.
1. Always switch OFF the user system and the emulator
2. The user system interface cable dedicated to the
cable, apply force only in the direction suitable for
connection or removal, while making sure not to bend or
twist the cable or connectors. Otherwise, the connectors
will be damaged.
Connecting User System Interface Cable to Emulator Station
Observe the precautions listed below. Failure to do so
product before the USER SYSTEM INTERFACE CABLE
is connected to or removed from any part. Before
connecting, make sure that pin 1 on both sides are
correctly aligned.
emulator must be used.
When connecting or removing the user system interface
Section 2 Connection Procedures
CAUTION
WARNING
3