EVAL-ADM1062LFEB Analog Devices Inc, EVAL-ADM1062LFEB Datasheet - Page 36

• Manufacturer Part Number: EVAL-ADM1062LFEB
• Description: BOARD EVALUATION FOR ADM1062LF
• Manufacturer: Analog Devices Inc

Specifications of EVAL-ADM1062LFEB

• Main Purpose: Power Management, Power Supply Supervisor/Tracker/Sequencer
• Embedded: No
• Utilized Ic / Part: ADM1062
• Primary Attributes: 10 Inputs, 10 Outputs (6 can be FET Drivers)
• Secondary Attributes: Graphic User Interface
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

EVAL-ADM106x
the user to confirm the voltage output is as they programmed it to
be. A running graph provides a visual representation of this. The
graph also allows rough verification of a programmed sequence,
although its update rate is slow and cannot accurately display the
delay times between channels below 100ms delay. The PDO
readback functionality is shown below:-
Press to begin chart update:- This button enables the chart. The voted
in channels are then displayed as the chart scrolls.
Clear chart:- This function clears the chart history.
XY Grid ON/OFF:- This will turn the grid on or off.
Reset Y axis to default:- This will reset the Y axis to display 0 – 15V
Calibrate Evaluation Board:- This function will launch a program as
shown in figure 75 which will individually calibrate the 72 onboard power
supplies to +/- 1% accuracy.
Figure 74. PDO Readback Evaluation board configuration
Calibrate the onboard power supplies
Figure 75. Onboard power supply calibration window
Graph tools
Onboard ADC
Readback of the
voted in channels
Charge pump output
Rev. PrB | Page 36 of 38
Similar to the inputs, the PDO pin names are imported into this
window for easy reference.
REGISTER ACCESS
The register access window allows the user to access all the
configurable locations and edit them using the buttons as
indicated in figure 76. For detailed information on registers
reference should be made to the AN-698 and AN-721
application notes available on the analog web page.
MENU BAR
The menu bar at the top of the Configuration Tool screen
provides a number of options which can be accessed at any
time.
File
Under this heading there is a drop down list of options and their
short cuts.
Figure 76. Register access window
Preliminary Technical Data
Figure 78. File sub-menu
Figure 77. Menu bar
Select registers using this
family tree.
Alter register contents
using these buttons