AD9959/PCBZ Analog Devices Inc, AD9959/PCBZ Datasheet - Page 7

• Manufacturer Part Number: AD9959/PCBZ
• Description: BOARD EVALUATION FOR AD9959
• Manufacturer: Analog Devices Inc

Specifications of AD9959/PCBZ

• Design Resources: Phase Coherent FSK Modulator (CN0186)
• Main Purpose: Timing, Direct Digital Synthesis (DDS)
• Embedded: No
• Utilized Ic / Part: AD9959
• Primary Attributes: 10-Bit DAC, 32-Bit Tuning Word Width
• Secondary Attributes: 4 Channels
• Silicon Core Number: AD9959
• Application Sub Type: Frequency Synthesizer
• Kit Contents: Board, AD9959 / PCB Installation Software
• Silicon Manufacturer: Analog Devices
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: AD9959/PCB; AD9959/PCB; Q2548077

8.
Once this screen has disappeared, you should notice that the USB
Status LED (CR2 on AD9959 evaluation board) is flashing, which
indicates that the evaluation board is connected properly.
After the window in Figure 12 appears, click Finish to exit.
Figure 12.
Rev. 0 | Page 7 of 28
LOADING THE SOFTWARE
Follow these three steps to load the AD9959 evaluation
software:
1.
2.
3.
After completing these steps, the AD9959 evaluation software
loads onto your PC system. You are then presented with one of
several status messages. These messages are discussed in further
detail in the next section, Status Messages upon Loading
Software.
Before starting the software, make sure that the AD9959
evaluation board is powered up, connected to the
computer, and that the USB Status LED is flashing.
Click on the Start button, located at the bottom left-hand
corner of your desktop.
Select Programs, then the AD9958_59 Eval Software
folder, and then AD9958_59 Eval Software to load the
software (see Figure 13).
Figure 13.
AD9959/PCB