STEVAL-PCC004V1 STMicroelectronics, STEVAL-PCC004V1 Datasheet - Page 11

• Manufacturer Part Number: STEVAL-PCC004V1
• Description: BOARD EVAL USB STUSB02E/ST72F63B
• Manufacturer: STMicroelectronics

Specifications of STEVAL-PCC004V1

• Main Purpose: Interface, USB 2.0 Slave
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: STUSB02E, ST72F63B
• Primary Attributes: Low Speed (1.5Mbps)
• Secondary Attributes: GUI of HID, ESD Protection
• Processor To Be Evaluated: ST72F63BE2
• Data Bus Width: 8 bit
• Interface Type: USB
• Silicon Manufacturer: ST Micro
• Silicon Core Number: STUSB02E, ST7263BE2
• Kit Contents: Board CD Docs
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-8209; STEVAL-PCC004V1

UM0529
4
Power requirements
The recommended supply voltages for the STUSB02E/STUSB03E USB transceivers are
the following:
1.
2.
The V
as the built-in voltage regulator of the ST72F63B.
Both evaluation boards are designed for two power supply configurations. It can be bus
powered from the mini-B connector. There is another option available for powering the
board using the J3 connector. J3 can be used for powering the board from an external
supply. There is a three-pin jumper J4 on the board which selects the power supply
configuration.
V
V
IF
IF
BUS
for the USB transceiver can be obtained from the onboard voltage regulator as well
= 1.6 - 3.6 V (typical value: V
= 4.0 - 5.5 V (typical value: V
IF
BUS
= 1.8 V)
= 5 V)
Power requirements
11/29