STEVAL-PCC004V1 STMicroelectronics, STEVAL-PCC004V1 Datasheet - Page 12

• Manufacturer Part Number: STEVAL-PCC004V1
• Description: BOARD EVAL USB STUSB02E/ST72F63B
• Manufacturer: STMicroelectronics

Specifications of STEVAL-PCC004V1

• Main Purpose: Interface, USB 2.0 Slave
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: STUSB02E, ST72F63B
• Primary Attributes: Low Speed (1.5Mbps)
• Secondary Attributes: GUI of HID, ESD Protection
• Processor To Be Evaluated: ST72F63BE2
• Data Bus Width: 8 bit
• Interface Type: USB
• Silicon Manufacturer: ST Micro
• Silicon Core Number: STUSB02E, ST7263BE2
• Kit Contents: Board CD Docs
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-8209; STEVAL-PCC004V1

Pin assignments
5
5.1
12/29
Pin assignments
Jumpers details
Table
settings are same for both the STUSB02E and STUSB03 evaluation boards except for
jumper J10 and J12.
Table 2.
Table 3.
Jumper
Jumper
JP1
JP2
JP3
JP4
J13
J8
J9
2, 3, and
Related pin(s)
Related pin(s)
General jumper assignments
Voltage regulator U4 related jumper assignment
4
OSCIN
show jumper assignments of the demonstration board. All the jumper
PB7
PB6
PA7
PA6
INH
V
IN
Open: disconnects LED D1 from the microcontroller pin
connected to it.
Open: disconnects LED D2 from the microcontroller pin
connected to it.
Open: disconnects LED D3 from the microcontroller pin
connected to it.
Open: disconnects LED D4 from the microcontroller pin
connected to it.
Closed: connects main clock input for external source.
Open: disconnects the external voltage regulator supply
voltage
Closed: connects the V
U4 when external regulator is to be used.
Pin 1 and 2 closed: connects the INHIBIT of U4 to V
to switch on the external voltage regulator U4
Pin 2 and 3 closed: connects the INHIBIT pin of U4 to
GND to switch off the external voltage regulator U4.
Description
Description
CC
to IN pin of voltage regulator
CC
Pin 2 and
3 closed
UM0529
Default
Default
Closed
Closed
Closed
Closed
Open
Open