C8051F064EK Silicon Laboratories Inc, C8051F064EK Datasheet - Page 7

• Manufacturer Part Number: C8051F064EK
• Description: KIT EVAL FOR C8051F064
• Manufacturer: Silicon Laboratories Inc
• Type: MCUr

Specifications of C8051F064EK

• Contents: Evaluation Board, Power Supply, USB Cables, Adapter and Documentation
• Processor To Be Evaluated: C8051F06x
• Interface Type: USB
• Silicon Manufacturer: Silicon Labs
• Core Architecture: 8051
• Silicon Core Number: C8051F064
• Silicon Family Name: C8051F06x
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: C8051F064
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1219

7. Using the Keil Software 8051 Tools with the Silicon Laboratories IDE
To perform source-level debugging with the IDE, you must configure the Keil 8051 tools to generate an absolute
object file in the OMF-51 format with object extensions and debug records enabled. You may build the OMF-51
absolute object file by calling the Keil 8051 tools at the command line (e.g., batch file or make file) or by using the
project manager built into the IDE. The default configuration when using the Silicon Laboratories IDE project
manager enables object extension and debug record generation. Refer to Application Note "AN104: Integrating Keil
8051 Tools into the Silicon Labs IDE" in the “SiLabs\MCU\Documentation\ApplicationNotes” directory for additional
information on using the Keil 8051 tools with the Silicon Laboratories IDE.
To build an absolute object file using the Silicon Laboratories IDE project manager, you must first create a project.
A project consists of a set of files, IDE configuration, debug views, and a target build configuration (list of files and
tool configurations used as input to the assembler, compiler, and linker when building an output object file).
The following sections illustrate the steps necessary to manually create a project with one or more source files,
build a program, and download the program to the target in preparation for debugging. (The IDE will automatically
create a single-file project using the currently open and active source file if you select Build/Make Project before a
project is defined.)
7.1. Creating a New Project
1. Select Project
2. Select File
3. Right-click on “New Project” in the Project Window. Select Add files to project. Select files in the file browser
4. For each of the files in the Project Window that you want assembled, compiled, and linked into the target build,
7.2. Building and Downloading the Program for Debugging
1. Once all source files have been added to the target build, build the project by clicking on the Build/Make
2. Before connecting to the target device, several connection options may need to be set. Open the Connection
3. Click the Connect button in the toolbar or select Debug
4. Download the project to the target by clicking the Download Code button in the toolbar.
5. Save the project when finished with the debug session to preserve the current target build configuration, editor
recognized extension, such as .c, .h, or .asm, to enable color syntax highlighting.
and click Open. Continue adding files until all project files have been added.
right-click on the file name and select Add file to build. Each file will be assembled or compiled as appropriate
(based on file extension) and linked into the build of the absolute object file.
Project button in the toolbar or selecting Project
Note: After the project has been built the first time, the Build/Make Project command will only build the files
that have been changed since the previous build. To rebuild all files and project dependencies, click on the
Rebuild All button in the toolbar or select Project
Options window by selecting Options
adapter in the “Serial Adapter” section. Next, the correct “Debug Interface” must be selected. C8051F06x family
devices use the JTAG debug interface. Once all the selections are made, click the OK button to close the
window.
Note: To enable automatic downloading if the program build is successful, select Enable automatic connect/
download after build in the Project
process, the IDE will not attempt the download.
settings and the location of all open debug views. To save the project, select Project
from the menu. Create a new name for the project and click on Save.
Note: If a project contains a large number of files, the “Group” feature of the IDE can be used to organize.
Right-click on “New Project” in the Project Window. Select Add Groups to project. Add pre-defined groups
or add customized groups. Right-click on the group name and choose Add file to group. Select files to be
added. Continue adding files until all project files have been added.
→
New File to open an editor window. Create your source file(s) and save the file(s) with a
→
New Project to open a new project and reset all configuration settings to default.
→
→
Target Build Configuration dialog. If errors occur during the build
Connection Options. . . in the IDE menu. First, select the appropriate
→
→
Rev. 0.4
Build/Make Project from the menu.
Rebuild All from the menu.
→
Connect from the menu to connect to the device.
C8051F064-EK
→
Save Project As. . .
7