DEMOQE128 Freescale Semiconductor, DEMOQE128 Datasheet - Page 44

• Manufacturer Part Number: DEMOQE128
• Description: DEMO BOARD FOR QE128 FLEXIS
• Manufacturer: Freescale Semiconductor
• Series: Flexis™r
• Type: MCUr

Specifications of DEMOQE128

• Contents: Demo Board, USB Cable, Documentation and Design Files
• Processor To Be Evaluated: MC9S08QE128 and MCF51QE128
• Data Bus Width: 8 bit, 32 bit
• Interface Type: RS-232, USB
• Silicon Manufacturer: Freescale
• Core Architecture: Coldfire, HCS08
• Core Sub-architecture: Coldfire V1, HCS08
• Silicon Core Number: MCF51Q, MC9S08
• Rohs Compliant: Yes
• Tool Type: Demonstration Board
• Cpu Core: HCS08
• For Use With/related Products: MC9S08QE128, MCF51QE128
• For Use With: DEMOACEX - BOARD EXPANSION FOR DEMO KIT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

8.4.1
8.4.2
8.4.3
40
Figure 8-8: Jumper Settings for Input Signals to P&E’s Embedded Multilink, P&E
Figure 8-9: Jumper Settings for Light Touch Switches KEY_ENABLE (J12)
J11 - P&E’s Logic Analyzer Inputs IN0/IN1
J12 - Light Touch Switch Enable Jumper KEY_ENABLE
J18 - Reset Switch Enable and Reset LED Display Enable Jumper
RESET_EN
The logic analyzer inputs are marked on one side of the J11 jumper. The
inputs allow P&E’s PC-based logic analyzer application to display these
signals in real-time.
By installing both jumpers, the logic analyzer pins IN0 and IN1 will be
connected to PTC0 and PTC1 respectively.
By removing these jumpers IN0 and IN1 will be unconnected. The
user may connect these signals, via wires, to any other signals on the
processor which they wish to view on the PC.
Enables the corresponding switch. Each jumper may be individually
installed or removed. By default, all jumpers are installed to enable all
the switches.
Enables the Reset Switch and the Reset LED Display. Each jumper
INPUT_EN (J11)
DEMOQE128 User Manual