M52210DEMO Freescale Semiconductor, M52210DEMO Datasheet - Page 7

• Manufacturer Part Number: M52210DEMO
• Description: BOARD DEV MCF5221X LOW COST
• Manufacturer: Freescale Semiconductor
• Series: ColdFire®r
• Type: MCUr

Specifications of M52210DEMO

• Contents: Module and Misc Hardware
• Processor To Be Evaluated: MCF52210
• Data Bus Width: 32 bit
• Interface Type: RS-232, Ethernet, USB
• Architecture: 32-bit (not ARM)
• Silicon Manufacturer: Freescale
• Core Architecture: Coldfire
• Core Sub-architecture: Coldfire V2
• Silicon Core Number: MCF52
• Silicon Family Name: MCF5221x
• Kit Contents: Board
• Rohs Compliant: Yes
• For Use With/related Products: MCF5221x
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

M 5 2 2 1 0 D E M O
U S E R
G U I D E
A U G U S T
2 1 ,
2 0 0 7
GETTING STARTED
To get started quickly, please refer to the M52210demo Quick Start Guide. This quick start will
illustrate connecting the board to a PC, installing the correct version of CodeWarrior Develop-
ment Studio, and running a simple HID test program.
SOFTWARE DEVELOPMENT
Software development requires a ColdFire assembler or compiler, a host PC running a Cold-
Fire BDM interface, and a ColdFire BDM cable. The BDM cable has been integrated into the
M52210DEMO board to simplify application development. CodeWarrior Special Edition, sup-
plied with this board, allows the user to develop and debug application code and to program
flash.
MEMORY MAP
Refer to the MCF52211 Integrated Microcontroller Reference Manual (RM) for details. The
RM may be downloaded from the Freescale web site at www.freescale.com.
DEVELOPMENT SUPPORT
Application development and debug for the target MCF52210 is supported through the BDM
interface. The debug interface consists of an optional 26-pin header (BDM_PORT) and an in-
tegrated USB BDM debugger. The BDM_PORT header is not installed in default configuration
and may be installed by the user if needed. Refer to the MCF52223 RM for details on using
the Background Debug Module
Optional JTAG access is also supported through the BDM_PORT header. To use this optional
JTAG access, open the cut-trace between pin 1 and pin 2 of the BDM_SEL option header. In-
stall a standard 1x3, 0.1”, header at location BDM_SEL and install a shunt from pin 2 to pin 3.
Refer to the MCF52223 RM (www.freescale.com) for details on using the JTAG port access.
BDM_PORT Header
A ColdFire compatible BDM cable may be attached to the 26-pin BDM_PORT port header.
This header is not installed in default configuration. To use this feature, simply install a 2x13,
0.1” center, pin-header. Refer to the BDM documentation, in the RM, for details on using the
BDM cable. The BDM_PORT header pin-out is shown below.
7