101-1157 Rabbit Semiconductor, 101-1157 Datasheet - Page 54

• Manufacturer Part Number: 101-1157
• Description: KIT DEVELOPMENT USA RCM4100
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 4000r
• Type: MPU Moduler

Specifications of 101-1157

• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• Processor To Be Evaluated: Rabbit 4001
• Data Bus Width: 8 bit
• Interface Type: SPI
• For Use With/related Products: RCM4100
• Lead Free Status / RoHS Status: Lead free / RoHS compliant by exemption
• Other names: 316-1123

PARAMETERS
RETURN VALUE
SEE ALSO
50
instructionbyte the instruction byte that will initiate a read or write operation
cmd
brate
0 on write operations
data value on read operations
anaInDriver, anaIn, brdInit
anaInConfig (continued)
at 8 or 16 bits on the designated register address. For example,
the command data that configure the registers addressed by the in-
struction byte. Enter 0 if you are performing a read operation. For
example,
the serial clock transfer rate of 9600 to 115,200 bytes per second.
brate must be set the first time this function is called. Enter 0 for
this parameter thereafter, for example,
checkid = anaInConfig(0x5F, 0, 9600);
i = anaInConfig(0x07, 0x3b, 0);
anaInConfig(0x00, 0x00, 9600);
// read ID and set baud rate
// write ref/osc reg and enable
// resets device and sets byte rate
RabbitCore RCM4100