FP-PROBE Fluke Electronics, FP-PROBE Datasheet - Page 21

• Manufacturer Part Number: FP-PROBE
• Description: PROBE FOR FOODPRO PLUS
• Manufacturer: Fluke Electronics
• Series: FoodPro Plusr
• Type: Temperature Prober

Specifications of FP-PROBE

• Usage: Liquids, Semi Solids
• Tip - Type: RTD
• Probe Temperature Range: -40 ~ 392°F (-40 ~ 200°C)
• Probe Length: 3.000" (76.20mm)
• Probe Material: Platinum
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Cable Length: -
• Plug Color: -
• Cable Insulation: -
• Plug Type: -
• Other names: 2477961

Troubleshooting
Code:
Problem:
Action:
Code:
Problem:
Action:
Code:
Problem:
Action:
Other Operational Considerations
All models are protected from the following:
EMI (Electro Magnetic Interference) from induction heaters and
Electrostatic discharge
Should the unit become damaged, check the accuracy of the unit by
Heat from stovetops, pans, or other hot surfaces (don’t set it on the
microwave ovens
performing the verification process recommended in this manual. If the
unit is out of calibration, do not rely on it for critical temperature
measurements. Contact a Fluke service center for repair,
stove)
Each time the battery is installed or replaced, the temperature
scale will default to the Celsius scale. To select the Fahrenheit
scale see ‘Setting/Changing C and F Temperature Scales’.
--- (on display)
Target temperature is over or under range
Select target within range specifications
Battery Symbol
Possible low battery
Check and/or replace battery
Blank display
Dead battery or unit failure
Check and/or replace battery. If the battery is OK, then
contact a Fluke service center for repair.
Setting/Changing ºC and ºF Temperature Scales
Note
Noncontact Food Safety Thermometer
17