ATTINY2313V-10PU Atmel, ATTINY2313V-10PU Datasheet - Page 220

• Manufacturer Part Number: ATTINY2313V-10PU
• Description: IC MCU AVR 2K FLASH 20DIP
• Manufacturer: Atmel
• Series: AVR® ATtinyr

Specifications of ATTINY2313V-10PU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 10MHz
• Connectivity: SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 18
• Program Memory Size: 2KB (1K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 128 x 8
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-DIP (0.300", 7.62mm)
• Processor Series: ATTINY2x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Interface Type: SPI/UART/USI
• Maximum Clock Frequency: 10 MHz
• Number Of Programmable I/os: 18
• Number Of Timers: 2
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• Package: 20PDIP
• Device Core: AVR
• Family Name: ATtiny
• Maximum Speed: 10 MHz
• Data Rom Size: 128 B
• Height: 4.95 mm
• Length: 26.92 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 1.8 V
• Width: 7.11 mm
• For Use With: ATSTK600-DIP40 - STK600 SOCKET/ADAPTER 40-PDIP770-1007 - ISP 4PORT ATMEL AVR MCU SPI/JTAGATAVRDRAGON - KIT DRAGON 32KB FLASH MEM AVRATAVRISP2 - PROGRAMMER AVR IN SYSTEMATJTAGICE2 - AVR ON-CHIP D-BUG SYSTEM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Datasheet
Revision
History
Rev. 2543L - 8/10
Rev. 2543K - 03/10
Rev. 2543J - 11/09
Changes from Rev.
2543H-02/05 to
Rev. 2543I-04/06
Changes from Rev.
2543G-10/04 to
Rev. 2543H-02/05
220
ATtiny2313
Please note that the referring page numbers in this section refer to the complete document.
Added tape and reel part numbers in
“Not recommended for new design” from cover page. Fixed literature number mismatch
in Datasheet Revision History.
1.
1.
2.
3.
4.
5.
1.
2.
3
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
1.
2.
Added device Rev C “No known errata” in
Updated
Changed occurences of OCnA to OCFnA, OCnB to OCFnB and OC1x to
Updated
Changed CKSEL default value in
Updated template
Changed device status to “Not recommended for new designs.”
Updated
Updated Table
Updated
Updated typos.
Updated
Added
Updated
Updated
Updated
Updated
Table 19 on page
Updated
61.
Updated
149.
Updated
Updated
Updated
Updated
OCF1x.
and
8 MHz.
Table 80 on page
“Resources” on page
“Stack Pointer” on page
“Calibration Byte” on page 160
Figure 1 on page
“Default Clock Source” on page
“128 kHz Internal Oscillator” on page
“Power Management and Sleep Modes” on page 30
“External Interrupts” on page
“Calibration Byte” on page
“DC Characteristics” on page
“Register Summary” on page
“Ordering Information” on page
Table 6 on page
Table 3 on page 23,Table 13 on page
“Bit 6 – ACBG: Analog Comparator Bandgap Select” on page
“Bit 7..0 – PCINT7..0: Pin Change Enable Mask 7..0” on page
“Sleep Mode Select” on page
42,
Table 31 on page
179.
25,
2.
“Ordering Information” on page
Table 15 on page
6.
“Default Clock Source” on page 23
11.
160.
60,
211.
59.
177.
(to one byte of calibration data)
215.
23.
“Errata” on page
Table 79 on page
30.
28.
34,
30,
Table 68 on page 160
Table 14 on page
219.
176.
215. Removed text
2543L–AVR–08/10
31,
to