PIC24FJ16GA002-E/ML Microchip Technology, PIC24FJ16GA002-E/ML Datasheet - Page 31

• Manufacturer Part Number: PIC24FJ16GA002-E/ML
• Description: IC PIC MCU FLASH 16K 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ16GA002-E/ML

• Program Memory Type: FLASH
• Program Memory Size: 16KB (5.5K x 24)
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 21
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Processor Series: PIC24FJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 4 KB
• Interface Type: I2C, IrDA, SPI, UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 5
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240011, MA240013, AC164127, DM300027, DV164033, DM240002
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 10 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DM240011 - KIT STARTER MPLAB FOR PIC24F MCUAC162088 - HEADER MPLAB ICD2 24FJ64GA004 28AC164336 - MODULE SOCKET FOR PM3 28/44QFNDV164033 - KIT START EXPLORER 16 MPLAB ICD2
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

TABLE 4-2:
© 2008 Microchip Technology Inc.
ICS
IESO
IOL1WAY
JTAGEN
OSCIOFNC
SOSCSEL1:
SOSCSEL0
POSCMD1:
POSCMD0
WDTPOST3:
WDTPOST0
WDTPRE
WINDIS
WUTSEL1:
WUTSEL0
Note 1:
(1)
Bit Field
2:
(1)
(2)
Available on 28 and 44-pin packages only.
Available only on 28 and 44-pin devices with a silicon revision of 3042h or higher.
(2)
PIC24FJXXXGA0XX FAMILY CONFIGURATION BITS DESCRIPTION (CONTINUED)
CW2<12:11>
CW2<14:13>
CW2<1:0>
CW1<3:0>
CW2<15>
CW1<14>
Register
CW1<8>
CW2<4>
CW2<5>
CW1<4>
CW1<6>
ICD Pin Placement Select bit
11 = ICD EMUC/EMUD pins are shared with PGC1/PGD1
10 = ICD EMUC/EMUD pins are shared with PGC2/PGD2
01 = ICD EMUC/EMUD pins are shared with PGC3/PGD3
00 = Reserved; do not use
Internal External Switchover bit
1 = Two-Speed Start-up enabled
0 = Two-Speed Start-up disabled
IOLOCK Bit One-Way Set Enable bit
0 = The OSCCON<IOLOCK> bit can be set and cleared as needed (provided
1 = The OSCCON<IOLOCK> bit can only be set once (provided an unlocking
JTAG Enable bit
1 = JTAG enabled
0 = JTAG disabled
OSC2 Pin Function bit (except in XT and HS modes)
1 = OSC2 is clock output
0 = OSC2 is general purpose digital I/O pin
Secondary Oscillator Power Mode Select bits
11 = Default (high drive strength) mode
01 = Low-Power (low drive strength) mode
x0 = Reserved; do not use
Primary Oscillator Mode Select bits
11 = Primary oscillator disabled
10 = HS Crystal Oscillator mode
01 = XT Crystal Oscillator mode
00 = EC (External Clock) mode
Watchdog Timer Prescaler bit
1111 = 1:32,768
1110 = 1:16,384
0001 = 1:2
0000 = 1:1
Watchdog Timer Postscaler bit
1 = 1:128
0 = 1:32
Windowed WDT bit
1 = Watchdog Timer in Non-Window mode
0 = Watchdog Timer in Window mode; FWDTEN must be ‘1’
Voltage Regulator Standby Mode Wake-up Time Select bits
11 = Default regulator wake time used
01 = Fast regulator wake time used
x0 = Reserved; do not use
.
.
.
an unlocking sequence is executed)
sequence is executed). Once IOLOCK is set, this prevents any possible
future RP register changes
PIC24FJXXXGA0XX
Description
DS39768D-page 31