PIC18F26J50-I/SS Microchip Technology, PIC18F26J50-I/SS Datasheet - Page 22

• Manufacturer Part Number: PIC18F26J50-I/SS
• Description: IC PIC MCU FLASH 64K 2V 28-SSOP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F26J50-I/SS

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SSOP
• Controller Family/series: PIC18
• No. Of I/o's: 16
• Ram Memory Size: 3.6875KB
• Cpu Speed: 48MHz
• No. Of Timers: 2
• Interface: EUSART, I2C, SPI, USB
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3776 B
• Interface Type: EUSART, I2C, SPI
• Maximum Clock Frequency: 48 MHz
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM183032, DV164136, MA180024, DM183022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 10 Channel
• Package: 28SSOP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 48 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164322 - MODULE SOCKET MPLAB PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC18F2XJXX/4XJXX FAMILY
TABLE 5-5:
DS39687E-page 22
DSWTPS<3:0>
DSWDTEN
DSBOREN
RTCOSC
DSWDTOSC
MSSPMSK
IOL1WAY
WPCFG
WPEND
Note 1: The Configuration bits can only be programmed indirectly by programming the Flash Configuration Word.
Bit Name
(4)
2: The Configuration bits are reset to ‘1’ only on V
3: These bits are not implemented in PIC18F46J11 family devices.
4: Once this bit is cleared, all the Configuration registers which reside in the last page are also protected. To disable code
(1,2)
protection, perform an ICSP™ Bulk Erase operation.
PIC18F46J11 AND PIC18F46J50 FAMILY DEVICES: BIT DESCRIPTIONS (CONTINUED)
Configuration
CONFIG3H
CONFIG3H
CONFIG3L
CONFIG3L
CONFIG3L
CONFIG3L
CONFIG3L
CONFIG4L
CONFIG4L
Words
Deep Sleep Watchdog Timer Postscale Select bits
The DSWDT prescaler is 32; this creates an approximate base time unit of 1 ms.
1111 = 1:2,147,483,648 (25.7 days)
1110 = 1:536,870,912 (6.4 days)
1101 = 1:134,217,728 (38.5 hours)
1100 = 1:33,554,432 (9.6 hours)
1011 = 1:8,388,608 (2.4 hours)
1010 = 1:2,097,152 (36 minutes)
1001 = 1:524,288 (9 minutes)
1000 = 1:131,072 (135 seconds)
0111 = 1:32,768 (34 seconds)
0110 = 1:8,192 (8.5 seconds)
0101 = 1:2,048 (2.1 seconds)
0100 = 1:512 (528 ms)
0011 = 1:128 (132 ms)
0010 = 1:32 (33 ms)
0001 = 1:8 (8.3 ms)
0000 = 1:2 (2.1 ms)
Deep Sleep Watchdog Timer Enable bit
1 = DSWDT enabled
0 = DSWDT disabled
Deep Sleep BOR Enable bit
1 = BOR enabled in Deep Sleep
0 = BOR disabled in Deep Sleep (does not affect operation in non Deep Sleep modes)
RTCC Reference Clock Select bit
1 = RTCC uses T1OSC/T1CKI as reference clock
0 = RTCC uses INTRC as reference clock
DSWDT Reference Clock Select bit
1 = DSWDT uses INTRC as reference clock
0 = DSWDT uses T1OSC/T1CKI as reference clock
MSSP 7-Bit Address Masking Mode Enable bit
1 = 7-Bit Address Masking mode enable
0 = 5-Bit Address Masking mode enable
IOLOCK Bit One-Way Set Enable bit
1 = The IOLOCK bit (PPSCON<0>) can be set once, provided the unlock sequence has
0 = The IOLOCK bit (PPSCON<0>) can be set and cleared as needed, provided the
Write/Erase Protect Configuration Words Page bit (valid when WPDIS = 0)
1 = Configuration Words page is not erase/write-protected unless WPEND and
0 = Configuration Words page is erase/write-protected, regardless of WPEND and
Write/Erase Protect Region Select bit (valid when WPDIS = 0)
1 = Flash pages, WPFP<5:0> to Configuration Words page, are write/erase-protected
0 = Flash pages, 0 to WPFP<5:0> are write/erase-protected
been completed. Once set, the Peripheral Pin Select registers cannot be written to a
second time.
unlock sequence has been completed
WPFP<5:0> settings include the Configuration Words page
WPFP<5:0> settings
DD
Reset; it is reloaded with the programmed value at any device Reset.
Description
© 2009 Microchip Technology Inc.