PIC18F86J90-I/PT Microchip Technology, PIC18F86J90-I/PT Datasheet - Page 3

• Manufacturer Part Number: PIC18F86J90-I/PT
• Description: IC PIC MCU FLASH 64KB 80-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F86J90-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 64KB (32K x 16)
• Package / Case: 80-TFQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, LVD, POR, PWM, WDT
• Number Of I /o: 67
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3923 B
• Interface Type: AUSART, EUSART, I2C, SPI
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 67
• Number Of Timers: 4
• Operating Supply Voltage: 2.65 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC162079 - HEADER MPLAB ICD2 18F85J90 64/80AC164328 - MODULE SKT FOR 80TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

LCD Driver and Keypad Interface
Features:
• Direct LCD Panel Drive Capability:
• Up to 48 Segments and 192 Pixels,
• Programmable LCD Timing module:
• On-Chip LCD Boost Voltage Regulator for
• Charge Time Measurement Unit (CTMU) for
• ADC for Resistive Touch Sensing
Low-Power Features:
• Power-Managed modes:
• Two-Speed Oscillator Start-up
Flexible Oscillator Structure:
• Two Crystal modes, 4-25 MHz
• Two External Clock modes, up to 48 MHz
• 4x Phase Lock Loop (PLL)
• Internal Oscillator Block with PLL:
• Secondary Oscillator using Timer1 at 32 kHz
• Fail-Safe Clock Monitor:
 2010 Microchip Technology Inc.
PIC18F66J90
PIC18F67J90
PIC18F86J90
PIC18F87J90
- Can drive LCD panel while in Sleep mode
Software Selectable
- Multiple LCD timing sources available
- Up to four commons: static, 1/2, 1/3 or
- Static, 1/2 or 1/3 bias configuration
Contrast Control
Capacitive Touch Sensing
- Run: CPU On, Peripherals On
- Idle: CPU Off, Peripherals On
- Sleep: CPU Off, Peripherals Off
- Eight user-selectable frequencies from
- Allows for safe shutdown if peripheral clock fails
1/4 multiplex
31.25 kHz to 8 MHz
Device
64/80-Pin, High-Performance Microcontrollers with
Program
Memory
(Bytes)
Flash
128K
128K
64K
64K
LCD Driver and nanoWatt Technology
Memory
(Bytes)
SRAM
3,923
3,923
3,923
3,923
Data
I/O
51
51
67
67
(Pixels)
LCD
132
132
192
192
PIC18F87J90 FAMILY
1/3
1/3
1/3
1/3
CCP
2
2
2
2
Peripheral Highlights:
• High-Current Sink/Source 25 mA/25 mA
• Up to Four External Interrupts
• Four 8-Bit/16-Bit Timer/Counter modules
• Two Capture/Compare/PWM (CCP) modules
• Master Synchronous Serial Port (MSSP) module
• One Addressable USART module
• One Enhanced Addressable USART module:
• 10-Bit, up to 12-Channel A/D Converter:
• Two Analog Comparators
• Programmable Reference Voltage for Comparators
• Hardware Real-Time Clock and Calendar (RTCC)
• Charge Time Measurement Unit (CTMU):
Special Microcontroller Features:
• 10,000 Erase/Write Cycle Flash Program
• Flash Retention 20 Years, Minimum
• Self-Programmable under Software Control
• Word Write Capability for Flash Program Memory
(PORTB and PORTC)
with Two Modes of Operation:
- 3-Wire/4-Wire SPI (supports all four SPI modes)
- I
- LIN/J2602 support
- Auto-wake-up on Start bit and Break character
- Auto-Baud Detect (ABD)
- Auto-acquisition
- Conversion available during Sleep
with Clock, Calendar and Alarm Functions
- Capacitance measurement
- Time measurement with 1 ns typical resolution
Memory, Typical
for Data EEPROM Emulators
Yes
Yes
Yes
Yes
SPI
2
C™ Master and Slave mode
MSSP
Master
I
2
Yes
Yes
Yes
Yes
C™
1/1
1/1
1/1
1/1
12
12
12
12
2
2
2
2
Yes
Yes
Yes
Yes
DS39933D-page 3
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes