PIC16F737-I/SP Microchip Technology, PIC16F737-I/SP Datasheet - Page 211

• Manufacturer Part Number: PIC16F737-I/SP
• Description: IC PIC MCU FLASH 4KX14 28DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F737-I/SP

• Program Memory Type: FLASH
• Program Memory Size: 7KB (4K x 14)
• Package / Case: 28-DIP (0.300", 7.62mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 25
• Ram Size: 368 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 368 B
• Interface Type: AUSART/CCP/I2C/MSSP/SPI
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 25
• Number Of Timers: 3
• Operating Supply Voltage: 4 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 11-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: I3DBF777 - BOARD DAUGHTER ICEPIC3
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

14.5.1
14.5.2
1997 Microchip Technology Inc.
PWM Period
PWM Duty Cycle
The PWM period is specified by writing to the PR2 register. The PWM period can be calculated
using the following formula:
PWM frequency (F
When TMR2 is equal to PR2, the following three events occur on the next increment cycle:
• TMR2 is cleared
• The CCPx pin is set (exception: if PWM duty cycle = 0%, the CCPx pin will not be set)
• The PWM duty cycle is latched from CCPRxL into CCPRxH
The PWM duty cycle is specified by writing to the CCPRxL register and to the DCxB1:DCxB0
(CCPxCON<5:4>) bits. Up to 10-bit resolution is available: the CCPRxL contains the eight MSbs
and CCPxCON<5:4> contains the two LSbs. This 10-bit value is represented by DCxB9:DCxB0.
The following equation is used to calculate the PWM duty cycle:
The DCxB9:DCxB0 bits can be written to at any time, but the duty cycle value is not latched into
CCPRxH until after a match between PR2 and TMR2 occurs (which is the end of the current
period). In PWM mode, CCPRxH is a read-only register.
The CCPRxH register and a 2-bit internal latch are used to double buffer the PWM duty cycle.
This double buffering is essential for glitchless PWM operation.
When CCPRxH and 2-bit latch match the value of TMR2 concatenated with the internal 2-bit
Q clock (or two bits of the TMR2 prescaler), the CCPx pin is cleared. This is the end of the duty
cycle.
Maximum PWM resolution (bits) for a given PWM frequency:
Note:
Note:
PWM duty cycle = (DCxB9:DCxB0 bits value) • Tosc • (TMR2 prescale value), in units of time
PWM period = [(PR2) + 1] • 4 • T
The Timer2 postscaler is not used in the determination of the PWM frequency. The
postscaler could be used to have a servo update rate at a different frequency than
the PWM output.
If the PWM duty cycle value is longer than the PWM period, the CCPx pin will not
be cleared. This allows a duty cycle of 100%.
PWM
) is defined as 1 / [PWM period].
OSC
=
• (TMR2 prescale value), specified in units of time
log
log(2)
(
F
F
PWM
OSC
)
Section 14. CCP
bits
DS31014A-page 14-9
14