ATMEGA164P-20MU Atmel, ATMEGA164P-20MU Datasheet - Page 368

• Manufacturer Part Number: ATMEGA164P-20MU
• Description: IC MCU AVR 16K FLASH 44-QFN
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA164P-20MU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Size: 16KB (8K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-VQFN Exposed Pad
• Processor Series: ATMEGA16x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: 2-Wire/JTAG/SPI/USART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• Package: 44MLF
• Device Core: AVR
• Family Name: ATmega
• Maximum Speed: 20 MHz
• Operating Supply Voltage: 3.3|5 V
• For Use With: ATSTK600-TQFP44 - STK600 SOCKET/ADAPTER 44-TQFPATSTK600 - DEV KIT FOR AVR/AVR32770-1007 - ISP 4PORT ATMEL AVR MCU SPI/JTAGATAVRISP2 - PROGRAMMER AVR IN SYSTEM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

26.2.3
Example
8011O–AVR–07/10
Supply Current of I/O modules
The tables and formulas below can be used to calculate the additional current consumption for
the different I/O modules in Active and Idle mode. The enabling or disabling of the I/O modules
are controlled by the Power Reduction Register. See
page 48
Table 26-3.
Table 26-4.
It is possible to calculate the typical current consumption based on the numbers from
on page 368
Calculate the expected current consumption in idle mode with TIMER1, ADC, and SPI enabled
at V
to add 9.7% for the TIMER1, 17.7% for the ADC, and 10.4% for the SPI module. Reading from
Figure 26-53 on page
and F = 1 MHz. The total current consumption in idle mode with TIMER1, ADC, and SPI
enabled, gives:
PRR bit
PRUSART1
PRUSART0
PRTWI
PRTIM2
PRTIM1
PRTIM0
PRADC
PRSPI
PRR bit
PRUSART1
PRUSART0
PRTWI
PRTIM2
PRTIM1
PRTIM0
PRADC
PRSPI
CC
= 2.0V and F = 1 MHz. From
for details.
for other V
Additional Current Consumption for the different I/O modules (absolute values)
Additional Current Consumption (percentage) in Active and Idle mode
Typical numbers
Additional Current consumption
compared to Active with external
clock (see
363
363)
V
CC
I
CC
365, we find that the idle current consumption is ~0.125 mA at V
and
= 2V, F = 1 MHz
CC
total
14.6 µA
11.7 µA
21.1 µA
10.7 µA
7.8 µA
7.6 µA
9.9 µA
6.0 µA
Figure 26-49 on page
and frequency settings than listed in
≈
Figure 26-48 on page
0.125 mA (1+ 0.097 + 0.177 + 0.104)
2.1 %
2.2%
3.1%
3.8%
2.6%
1.6%
4.8%
2.8%
Table 26-4 on page
⋅
V
CC
= 3V, F = 4 MHz
114.5 µA
50.0 µA
51.2 µA
73.3 µA
91.3 µA
64.0 µA
39.2 µA
67.7 µA
ATmega164P/324P/644P
Additional Current consumption
compared to Idle with external
clock (see
365
366)
”PRR – Power Reduction Register” on
368, third column, we see that we need
and
Figure 26-54 on page
Table 26-3 on page
≈
Figure 26-53 on page
0.172 mA
V
11.2%
14.1%
17.7%
10.4%
7.6%
8.0%
9.7%
6.1%
CC
= 5V, F = 8 MHz
215.5 µA
237.2 µA
309.3 µA
393.0 µA
271.7 µA
176.3 µA
437.2 µA
288.2 µA
368.
Table 26-4
CC
= 2.0V
368