PIC18F8410-I/PT Microchip Technology, PIC18F8410-I/PT Datasheet - Page 91

• Manufacturer Part Number: PIC18F8410-I/PT
• Description: IC PIC MCU FLASH 8KX16 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F8410-I/PT

• Core Size: 8-Bit
• Program Memory Size: 16KB (8K x 16)
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: EBI/EMI, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 70
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TFQFP
• Controller Family/series: PIC18
• No. Of I/o's: 70
• Ram Memory Size: 768Byte
• Cpu Speed: 40MHz
• No. Of Timers: 5
• Interface: I2C, SPI, USART
• Embedded Interface Type: I2C, SPI, USART
• Rohs Compliant: Yes
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 768 B
• Interface Type: SPI, I2C, EUSART, AUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 70
• Number Of Timers: 4
• Operating Supply Voltage: 4.2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136, DM163032
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT80PT3 - SOCKET TRAN ICE 80MQFP/TQFPAC164320 - MODULE SKT MPLAB PM3 80TQFPAC174011 - MODULE SKT PROMATEII 80TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

7.0
The external memory interface allows the device to
access external memory devices (such as Flash,
EPROM, SRAM, etc.) as program or data memory. It is
implemented with 28 pins, multiplexed across four I/O
ports. Three ports (PORTD, PORTE and PORTH) are
multiplexed with the address/data bus for a total of 20
available lines, while PORTJ is multiplexed with the
bus control signals. A list of the pins and their functions
is provided in Table 7-1.
REGISTER 7-1:
© 2007 Microchip Technology Inc.
Note:
EXTERNAL MEMORY
INTERFACE
bit 7
bit 6
bit 5-4
bit 3-2
bit 1-0
The external memory interface is not
implemented
PIC18F6410 (64-pin) devices.
MEMCON: MEMORY CONTROL REGISTER
EBDIS: External Bus Disable bit
1 = External system bus disabled, all external bus drivers are mapped as I/O ports
0 = External system bus enabled, I/O ports are disabled
Unimplemented: Read as ‘0’
WAIT1:WAIT0: Table Reads and Writes Bus Cycle Wait Count bits
11 = Table reads and writes will wait 0 T
10 = Table reads and writes will wait 1 T
01 = Table reads and writes will wait 2 T
00 = Table reads and writes will wait 3 T
Unimplemented: Read as ‘0’
WM1:WM0: TBLWRT Operation with 16-Bit Bus Width bits
1x = Word Write mode: TABLAT0 and TABLAT1 word output, WRH active when TABLAT1
01 = Byte Select mode: TABLAT data copied on both MSB and LSB, WRH and (UB or LB)
00 = Byte Write mode: TABLAT data copied on both MSB and LSB, WRH or WRL will activate
bit7
Legend:
R = Readable bit
-n = Value at POR
EBDIS
R/W-0
on
is written
will activate
PIC18F6310
U-0
—
PIC18F6310/6410/8310/8410
WAIT1
R/W-0
and
Preliminary
W = Writable bit
‘1’ = Bit is set
WAIT0
R/W-0
CY
CY
CY
CY
As implemented here, the interface is similar to that
introduced on PIC18F8X20 microcontrollers. The most
notable
PIC18F8310/8410 devices supports both 16-Bit and
Multiplexed 8-Bit Data Width modes; it does not sup-
port the 8-Bit Demultiplexed mode. The Bus Width
mode is set by the BW Configuration bit when the
device is programmed and cannot be changed in
software.
The operation of the interface is controlled by the
MEMCON register (Register 7-1). Clearing the EBDIS
bit (MEMCON<7>) enables the interface and disables
the I/O functions of the ports, as well as any other mul-
tiplexed functions. Setting the bit disables the interface
and enables the ports.
For a more complete discussion of the operating
modes that use the external memory interface, refer to
Section 7.1 “Program Memory Modes and the
External Memory Interface”.
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
difference
U-0
—
U-0
is
—
that
x = Bit is unknown
R/W-0
WM1
the
DS39635B-page 89
interface
R/W-0
WM0
bit0
on