PIC16F777-I/P Microchip Technology, PIC16F777-I/P Datasheet - Page 124

• Manufacturer Part Number: PIC16F777-I/P
• Description: IC PIC MCU FLASH 8KX14 40DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F777-I/P

• Program Memory Type: FLASH
• Program Memory Size: 14KB (8K x 14)
• Package / Case: 40-DIP (0.600", 15.24mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 36
• Ram Size: 368 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 14x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 368 B
• Interface Type: AUSART/CCP/I2C/MSSP/SPI
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 3
• Operating Supply Voltage: 4 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000, DM163022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 14-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: I3DBF777 - BOARD DAUGHTER ICEPIC3DVA18XP400 - DEVICE ADAPTER 18F4220 PDIP 40LD444-1001 - DEMO BOARD FOR PICMICRO MCU
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PICmicro MID-RANGE MCU FAMILY
8.1
DS31008A-page 8-2
Introduction
PICmicro MCUs can have many sources of interrupt. These sources generally include one inter-
rupt source for each peripheral module, though some modules may generate multiple interrupts
(such as the USART module). The current interrupts are:
• INT Pin Interrupt (external interrupt)
• TMR0 Overflow Interrupt
• PORTB Change Interrupt (pins RB7:RB4)
• Comparator Change Interrupt
• Parallel Slave Port Interrupt
• USART Interrupts
• Receive Interrupt
• Transmit Interrupt
• A/D Conversion Complete Interrupt
• LCD Interrupt.
• Data EEPROM Write Complete Interrupt
• Timer1 Overflow Interrupt
• Timer2 Overflow Interrupt
• CCP Interrupt
• SSP Interrupt
There is a minimum of one register used in the control and status of the interrupts. This register
is:
• INTCON
Additionally, if the device has peripheral interrupts, then it will have registers to enable the periph-
eral interrupts and registers to hold the interrupt flag bits. Depending on the device, the registers
are:
• PIE1
• PIR1
• PIE2
• PIR2
We will generically refer to these registers as PIR and PIE. If future devices provide more inter-
rupt sources, they will be supported by additional register pairs, such as PIR3 and PIE3.
The Interrupt Control Register, INTCON, records individual flag bits for core interrupt requests.
It also has various individual enable bits and the global interrupt enable bit.
1997 Microchip Technology Inc.