LPC3250FET296/01,5 NXP Semiconductors, LPC3250FET296/01,5 Datasheet - Page 11

• Manufacturer Part Number: LPC3250FET296/01,5
• Description: IC ARM9 MCU 256K 296-TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC32x0r

Specifications of LPC3250FET296/01,5

• Package / Case: 296-TFBGA
• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 266MHz
• Connectivity: EBI/EMI, Ethernet, I²C, IrDA, Microwire, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: DMA, I²S, LCD, Motor Control PWM, PWM, WDT
• Number Of I /o: 51
• Program Memory Type: ROMless
• Ram Size: 256K x 8
• Voltage - Supply (vcc/vdd): 0.9 V ~ 3.6 V
• Data Converters: A/D 3x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC32
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Data Ram Size: 256 KB
• Interface Type: EMC
• Maximum Clock Frequency: 266 MHz
• Number Of Timers: 6
• Operating Supply Voltage: 1.31 V to 1.39 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, DK-57TS-LPC3250, DK-57VTS-LPC3250, SOMDIMM-LPC3250
• Development Tools By Supplier: OM11016, OM11021, OM11045
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 3 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4962; 935290766551

NXP Semiconductors
ES_LPC3250
Errata sheet
3.5 DDR.1: DDR interface has >1.2 ns clock skew
3.6 LCD.1: Low throughput when LCD controller accesses DDR/SDRAM
Introduction:
DDR memory uses a differential clock which is generated by the LPC3250. The
differential clock consists of two clock signals: EMC_CLK is the positive clock and
DDR_nCLK is the negative clock.
Problem:
There is approximately 1.27 ns of skew between the low transition of the DDR_nCLK and
the high transition of the EMC_CLK. This can cause two problems: 1) Some DDR devices
use this clock transition to drive a digital lock loop (DLL) in the DDR device. The DDR
clock skew can cause the DDR device's internal DLL to loose lock, resulting in the wrong
data being latched. 2) The DDR clock skew can also cause a reduced Data Valid Window
(also called Data-Out Window) from a DDR device. However, the LPC3250 has a
programmable DQS delay to achieve center alignment for accurate data reads.
Work-around:
Connecting the DDR device negative clock input (DDR_nCLK from the LPC3250) to the
DDR Reference Voltage (Vref - the midpoint of the DDR signal voltage swing, which is
generally VDDQ/2) avoids the clock skew problem, though it also eliminates the
advantages of differential signaling. The LPC3250 DDR_nCLK output should be left
unconnected. DDR Reference Voltage can be generated with a divide-by-two voltage
divider. Standard DDR memories usually require a Vref input, so this DDR reference
voltage should already be available. Mobile DDR devices typically do not have a Vref
input, so the external voltage divider may need to be added to the design for this
work-around.
It is also possible to compensate for the 1.27 ns clock skew by adding an additional
7 inches of pcb trace length to the EMC_CLK signal. However, this could have
unintentional consequences; such as increased Electro-Magnetic Interference.
Introduction:
The LCD controller is an AHB Master that uses an internal DMA controller to transfer
frame data from memory to the LCD panel.
Problem:
The time required to read data from either SDR or DDR SDRAM using the LCD DMA
controller takes longer than expected. This issue has little effect when the LCD DMA
controller reads frame data from IRAM or external SRAM.
Work-around:
When using external SDRAM for the LCD framebuffer, use a display size and color depth
that reserves sufficient system bandwidth for the remaining peripherals in the application.
For systems using LCD displays sizes greater than QVGA and high color we suggest the
use of external SRAM.
All information provided in this document is subject to legal disclaimers.
Rev. 8 — 1 February 2011
ES_LPC3250
Errata sheet LPC3250
© NXP B.V. 2011. All rights reserved.
11 of 17