EZ80F91NAA50EG Zilog, EZ80F91NAA50EG Datasheet - Page 205

• Manufacturer Part Number: EZ80F91NAA50EG
• Description: IC ACCLAIM MCU 256KB 144BGA
• Manufacturer: Zilog
• Series: eZ80® AcclaimPlus!™r

Specifications of EZ80F91NAA50EG

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 50MHz
• Connectivity: Ethernet, I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 144-LBGA
• Processor Series: EZ80F91x
• Core: eZ80
• Data Bus Width: 8 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, IrDA, SPI
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 4
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: eZ80F910300ZCOG, eZ80F910200KITG
• Minimum Operating Temperature: - 40 C
• For Use With: 269-4712 - KIT DEV ENCORE 32 SERIES269-4671 - BOARD ZDOTS SBC Z80ACCLAIM PLUS269-4561 - KIT DEV FOR EZ80F91 W/C-COMPILER269-4560 - KIT DEV FOR EZ80F91 W/C-COMPILER
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-4565

Infrared Encoder/Decoder
PS027001-0707
System
Clock
Functional Description
Interrupt
Signal
The eZ80F91 device contains a UART to an infrared encoder/decoder (endec). The endec
is integrated with the on-chip UART0 to allow easy communication between the CPU and
IrDA Physical Layer Specification Version 1.4-compatible infrared transceivers, as illus-
trated in
cost, point-to-point communication between PCs, PDAs, mobile telephones, printers and
other infrared-enabled devices.
When the endec is enabled, the transmit data from the on-chip UART is encoded as digital
signals in accordance with the IrDA standard and output to the infrared transceiver. Like-
wise, data received from the infrared transceiver is decoded by the endec and passed to the
UART. Communication is half-duplex, meaning that simultaneous data transmission and
reception is not allowed.
The baud rate is set by the UART Baud Rate Generator (BRG), which supports IrDA stan-
dard baud rates from 9600 bps to 115.2 kbps. Higher baud rates are possible, but do not meet
Address
UART0
I/O
Figure
Figure 37. Infrared System Block Diagram
Data
37. Infrared communication provides secure, reliable, high-speed, low-
To eZ80 CPU
Baud Rate
eZ80F91
Clock
RxD
TxD
¤
Encoder/Decoder
Infrared
Address
I/O
Data
IR_RxD
IR_TxD
Product Specification
Infrared Encoder/Decoder
eZ80F91 ASSP
RxD
TxD
Transceiver
Infrared
197